Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Amazon Kindle Fire HDX 8.9
Brodit MultiStand (Brodit 215781)

MultiStand for Amazon Kindle Fire HDX 8.9
Reference ID: 57811.
Product Type: Brodit MultiStand.
Part Number: Brodit 215781.
Fitment: Amazon Kindle Fire HDX 8.9 For All Countries.

Price:

£ 33.7
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 98 mm long and fits best with smaller surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

This Product is also Compatible with the Following 78 Devices :

The drop-down list below provides a list of other devices which this MultiStand also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install MultiStand for Amazon Kindle Fire HDX 8.9:

Please read all of the instructions and look at the pictures before attaching the holder.
 
1. Remove the tilt swivel from the holder by loosing the screws on the front of the holder.
 
2. Place the MultiStand support leg so it fits with the holdes that used to hold the tilt swivel into place. Fasten the MultiStand support leg using the enclosed screws.
 
3. To install the multi stand: Press the mounting adapter on the back side of the holder downward, so it slides out from the groove. Place the mounting adapter into desired position and screw it into place with the enclosed screws. Place the holder above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the holder: Pull the holder straight upward, away from the mounting adapter.
 
4. The holder is in place in horizontal position.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Amazon Kindle Fire HDX 8.9:

Part No: Brodit 511582
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Amazon Kindle Fire HDX 8.9 for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Kindle Fire HDX 8.9 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Kindle Fire when it is in the holder.   
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Kindle Fire into place in the holder, and to take it with you when leaving the car.
More Info
Additional Information

Additional Information:
Why Buying «MultiStand for Amazon Kindle Fire HDX 8.9» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...