Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Apple IPad Air
Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 511577)

Passive Holder With Tilt Swivel for Apple IPad Air
Reference ID: 49203.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 511577.
Fitment: Apple IPad Air For All Countries.

Price:

£ 33.7
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

With your iPad Air in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

This Product is also Compatible with the Following 4 Devices :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for Apple IPad Air:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Apple IPad Air:

Part No: Brodit 521577
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 84.72
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. Apple approved charging cable. With tilt swivel.
Technical Information:
The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Length of charging cable: 123 cm.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 511600
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 33.7
Description:
For Otterbox Defender Series.
Technical Information:
With your iPad Air in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 546577
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 96.44
Description:
Active holder Plugs directly into your Cigarette lighter and USB cable. With tilt swivel. With spring stud locking.
Technical Information:
This holder is to be used when you want to have your iPad Air extra securely in place and still have it easy accessable. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket so you will always have a freshly charged battery!

Length of charging cable: 123 cm.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 536577
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 131.61
Description:
Active holder for fixed installation. With tilt swivel. 2 keys included.
Technical Information:
This holder is to be used when you will secure your iPad and still have it easy accessable. Perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. In order to remove the unit from the holder you need the key or a certain amount of violence is required. The holder includes a lock and two keys.

Keep your device in an active holder while on the road, and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 215661
Product Type: Brodit MultiStand
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 47.69
Description:
Mounting Adapter and Screws Included. For Otterbox Defender Series.
Technical Information:
By using the multi stand it is easier to carry your iPad Air around with you. You easily place the iPad Air in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the iPad Air when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 521600
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 84.72
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. Apple approved charging cable. With tilt swivel. For Otterbox Defender Series.
Technical Information:
The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Length of charging cable: 123 cm.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
 
Dimensions: 235 x 200 x 51 mm (W x H x D mm)
Weight: 340 g
Cable length (+connector with plug 85 mm): 123 cm
More Info
Part No: Brodit 541577
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 54.21
Description:
Passive holder with tilt swivel. With spring stud locking.
Technical Information:
This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 558920
Product Type: Brodit Tough Sleeve
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 195.13
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. Apple approved charging cable. With active MultiMoveClip. 12/24V. With tilt swivel.
Technical Information:
The choice for you who use your device every day in a rough environment! Your device is protected in a tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.
 
First you place your device in the tough sleeve, which is a slimmed version of a rubost case/jacket with built in bumpers (the Heavy Duty Tough Sleeve). The bumpers help to protect the device in case of minor bumps and drops. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.
 
The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform. 
 
Sleeve Dimensions: 255 x 190 x 24 mm (W x H x D mm). Weight: 825 g
MultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth and 21 mm to the height. Cable length 102 cm + 58 mm cig-plug adapter. Weight 131 g.
More Info
Part No: Brodit 527600
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 99.37
Description:
With tilt swivel. Apple approved charging cable. For Otterbox Defender Series.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!
 
12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
 
Dimensions: 235 x 200 x 51 mm (W x H x D mm)
Weight: 395 g
Cable length: Total length: 377 cm (Holder to box: 123 cm, Connectors+box 10 cm, Box to open end: 244 cm.)
More Info
Part No: Brodit 527577
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 99.37
Description:
With tilt swivel. Apple approved charging cable.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Multimedia in Vehicles.

Headrest monitor mount with flexible arm.
The headrest monitor mount with flexible arm allows you to adjust the monitor just the way you want: higher, lower, angle it, tilt it...

Monitor mount between seats.
A car specific monitor mount with tilt swivel. The monitor will be placed between the front seats, giving the back seat passengers a perfect view.

Holder for MP3-players.
Keep your MP3-player in a holder in the vehicle, and you will always have it in easy reach. The unit can be adjusted in order to avoid light reflection.

Headrest monitor mount.
Will be attached a front seat's headrest.

Mounting solutions for monitors in vehicles. The monitor's position gives the back seat passengers a perfect view. You can take the monitor with you when leaving the vehicle.

Many Alternatives.
There are monitor mounts to suit various positions, giving you options for positioning and making several different installations in the vehicle.

Does not Damage the Interior.
The interior of the vehicle will not be damaged as no drilling holes is required and you do not need to dismantle the dashboard.

Take the Monitor with You.
You can take the monitor with you when you leave the vehicle. It is easy to put the monitor in place, and to remove it from the mount.

With Tilt Swivel.
You can adjust the monitor in order to avoid light reflection in the screen.

Saves Time.
The monitor mounts save you time. Installation is easy, with no special tools required. Detailed instructions with pictures are included.

High Quality.
The monitor mounts have a firm fit. The between seats monitor mounts are custom made for every vehicle model.