Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Apple IPad
Brodit Car Cradle Holder With Pass-Through Connector (Brodit 516139)

Holder With Pass-Through Connector for Apple IPad
Reference ID: 25482.
Product Type: Brodit Car Cradle Holder With Pass-Through Connector.
Part Number: Brodit 516139.
Fitment: Apple IPad For All Countries.

Price:

£ 86.45
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPad can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPad each time you put it in the holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Car Cradle Holder With Pass-Through Connector also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder With Pass-Through Connector for Apple IPad:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull.

2. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. All cables that fit the device, can also be connected to the holder.

3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder Carefully, slide the device sideways into the holder so you hear/feel it snaps into place. To remove the device from the holder: Slide it to the left then press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Apple IPad:

Part No: Brodit 511139
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Apple iPad for all countries
Placement:
Price: £ 33.7
Technical Information:
With your iPad in a holder attached in your vehicle you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 215445
Product Type: Brodit Monitor Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 23.7
Description:
Wall mount. Black.
Technical Information:
Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.
More Info
Part No: Brodit 215444
Product Type: Brodit Monitor Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 23.7
Description:
Wall mount. White.
Technical Information:
Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of white ABS plastic.
More Info
Part No: Brodit 215447
Product Type: Brodit Headrest Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 82.4
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.
More Info
Part No: Brodit 215461
Product Type: Brodit Device Mounting Adapter
Product Fits: Apple iPad for all countries
Placement:
Price: £ 7.54
Description:
Mounting adapter for item no. 215473. Screws included. 50x60x8 mm.
Technical Information:
Mounting adapter for iPad MultiStand (item no 215473). Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of black ABS plastic. Dimensions: 50x60x8 mm.

Multistand demo film

Multistand demo film, mobile version
More Info
Part No: Brodit 514139
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPad for all countries
Placement:
Price: £ 45.41
Description:
For Apple original Cable (Short). With tilt swivel.
Technical Information:
The choice for you who often connect an Apple original cable (with thin plug) to your iPad. The connector is easy to attach to the holder. It then connects automatically to the iPad when you put it in the holder, so you do not have to connect the cable it manually each time.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 521139
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel. With USB cable. Apple approved charging cable.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder?s cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 215446
Product Type: Brodit Headrest Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 117.23
Technical Information:
Place your iPad on the wall and you will have it neatly in place where you want to use it! A discreet slim design wall mount for your home, summer house, caravan etc. You can connect e.g. a charging cable to the iPad when it is in the holder.

Keeps your iPad firmly in place. You can easily remove the iPad when you want to use it elsewhere. You can choose to install the mount in portrait or landscape mode. Made of black ABS plastic.
More Info
Part No: Brodit 527139
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Apple iPad for all countries
Placement:
Price: £ 99.37
Description:
With tilt swivel. 2A charger.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info
Part No: Brodit 810570
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Apple iPad for all countries
Placement:
Price: £ 77.01
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 211 mm
More Info
Catalog Pages:  [ 1 ] 2  3 
Additional Information

Additional Information:
Multimedia in Vehicles.

Headrest monitor mount with flexible arm.
The headrest monitor mount with flexible arm allows you to adjust the monitor just the way you want: higher, lower, angle it, tilt it...

Monitor mount between seats.
A car specific monitor mount with tilt swivel. The monitor will be placed between the front seats, giving the back seat passengers a perfect view.

Holder for MP3-players.
Keep your MP3-player in a holder in the vehicle, and you will always have it in easy reach. The unit can be adjusted in order to avoid light reflection.

Headrest monitor mount.
Will be attached a front seat's headrest.

Mounting solutions for monitors in vehicles. The monitor's position gives the back seat passengers a perfect view. You can take the monitor with you when leaving the vehicle.

Many Alternatives.
There are monitor mounts to suit various positions, giving you options for positioning and making several different installations in the vehicle.

Does not Damage the Interior.
The interior of the vehicle will not be damaged as no drilling holes is required and you do not need to dismantle the dashboard.

Take the Monitor with You.
You can take the monitor with you when you leave the vehicle. It is easy to put the monitor in place, and to remove it from the mount.

With Tilt Swivel.
You can adjust the monitor in order to avoid light reflection in the screen.

Saves Time.
The monitor mounts save you time. Installation is easy, with no special tools required. Detailed instructions with pictures are included.

High Quality.
The monitor mounts have a firm fit. The between seats monitor mounts are custom made for every vehicle model.