Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Dell Brodit Car Holder Mount Catalog

Part No: Brodit 511365
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Latitude ST 10,1" for all countries
Placement:
Price: £ 33.7
Technical Information:
With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511365
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Latitude for all countries
Placement:
Price: £ 33.7
Technical Information:
With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 539614
Product Type: Brodit Car Cradle Holder With Lock
Product Fits: Dell Venue 11 Pro, New (Model 7140) for all countries
Placement:
Price: £ 65.94
Description:
Passive holder with tilt swivel. 2 keys included.
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 848634
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell DJ5 for all countries
Placement:
Price: £ 21.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 941011
Product Type: Brodit Charging Cable
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Technical Information:
Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941010.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS

More Info Add to Shopping Cart
Part No: Brodit 513672
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel, with Molex adapter system. 2A charger. With fly lead. For device with Targus SafePORT Rugged Max Pro protective case.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 848633
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell DJ30 for USA
Placement:
Price: £ 21.89
Description:
2nd generation.
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 511614
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Venue 11 Pro for all countries
Placement:
Price: £ 33.7
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511725
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Venue 11 Pro (Model 5130) for all countries
Placement:
Price: £ 45.41
Description:
For device with Targus SafePORT Rugged Max Pro protective case.
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 848600
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell DJ15/DJ20 for all countries
Placement:
Price: £ 21.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 848634
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Pocket DJ for USA
Placement:
Price: £ 21.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 541614
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: Dell Venue 11 Pro, New (Model 7140) for all countries
Placement:
Price: £ 54.21
Description:
Passive holder with tilt swivel. With spring stud locking.
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511579
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Dell Venue 8 Pro in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Dell Venue 8 Pro when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Dell Venue 8 Pro into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 541585
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: Dell Latitude 10 - ST2 for all countries
Placement:
Price: £ 54.21
Description:
Passive holder with tilt swivel. With spring stud locking.
Technical Information:
This holder is to be used when you want to have your Latitude 10 - ST2 extra securely in place and still have it easy accessable.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 215705
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Dell Venue 8 Pro for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel, with Molex adapter system. 2A charger. With fly lead.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2  3