Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Sony Brodit Car Holder Mount Catalog

Part No: Brodit 848683
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony PSP for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PSP in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PSP in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PSP when it is in the holder.
More Info Add to Shopping Cart
Part No: Brodit 511538
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony Xperia Tablet Z for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Tablet Z in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Tablet Z when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Surface into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511655
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony Xperia Z2 Tablet for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Z2 Tablet in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the Z2 Tablet when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Z2 Tablet into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 512655
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Sony Xperia Z2 Tablet for all countries
Placement:
Price: £ 64.2
Description:
With tilt swivel.
Technical Information:
Use an active holder for your Xperia Z2 Tablet while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Xperia Z2 Tablet into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 848646
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony MP3 NW-HD5 for all countries
Placement:
Price: £ 24.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 848615
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony Walkman NW-HD1 MP3 for all countries
Placement:
Price: £ 24.89
Technical Information:
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
More Info Add to Shopping Cart
Part No: Brodit 512538
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Sony Xperia Tablet Z for all countries
Placement:
Price: £ 64.2
Description:
With tilt swivel.
Technical Information:
Use an active holder for your Tablet Z while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Tablet Z into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 941011
Product Type: Brodit Charging Cable
Product Fits: Sony Xperia Z2 Tablet for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Technical Information:
Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941010.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS

More Info Add to Shopping Cart
Part No: Brodit 511692
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony Xperia Z3 Tablet Compact for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Xperia Z3 Tablet Compact in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Xperia Z3 Tablet Compact when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Surface into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 941011
Product Type: Brodit Charging Cable
Product Fits: Sony Xperia Z3 Tablet Compact for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Technical Information:
Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941010.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS

More Info Add to Shopping Cart
Part No: Brodit 944011
Product Type: Brodit Charging Cable
Product Fits: Sony Xperia Z4 Tablet for all countries
Placement:
Price: £ 15.54
Description:
Micro USB. 12/24V. Angled.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.
More Info Add to Shopping Cart
Part No: Brodit 941011
Product Type: Brodit Charging Cable
Product Fits: Sony Xperia Z4 Tablet for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Technical Information:
Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941010.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS

More Info Add to Shopping Cart
Part No: Brodit 215781
Product Type: Brodit MultiStand
Product Fits: Sony Xperia Z2 Tablet for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for smaller surfpads. Length: 98 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 98 mm long and fits best with smaller surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 512692
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Sony Xperia Z3 Tablet Compact for all countries
Placement:
Price: £ 64.2
Description:
With tilt swivel.
Technical Information:
Use an active holder for your Xperia Z3 Tablet Compact while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Xperia Z3 Tablet Compact into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 944011
Product Type: Brodit Charging Cable
Product Fits: Sony Xperia Z3 Tablet Compact for all countries
Placement:
Price: £ 15.54
Description:
Micro USB. 12/24V. Angled.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2