Part No: Brodit
848570
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 21.94 ($ 34.42)
Description:
Built in original connector. Fits all cables. All expansionpack models, also Plus. iPAQ 38xx, 39xx, 54xx
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
945002
Product Type:
Brodit Charging/Data/Sync-Cable
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 20.9 ($ 32.79)
Description:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). 2 meter.
Technical Information:
Cable with iPAQ-connector and loose ends (with +, -, RX, TX). Is used for special applications. 2 meter.
|
Part No: Brodit
945004
Product Type:
Brodit Charging/Data/Sync-Cable
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 14.99 ($ 23.52)
Description:
HotSync cable with RS232 with separate charging.
Technical Information:
For use between PDA and laptop, charges separately. Can also be used with charging-cable 942016 for simultaneous charging and data transfer.
|
Part No: Brodit
968529
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
For expansion pack with 2 PCMCIA slots.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848508
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 21.94 ($ 34.42)
Description:
For unit without expansionpack.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
848569
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 21.94 ($ 34.42)
Description:
With built in original connector. Not expansionpack. Fits all cables.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
968534
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
Plugs directly into your Cigarette lighter. Not expansionpack.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
992570
Product Type:
Brodit Car Cradle Holder With Speaker
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 64.99 ($ 101.96)
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt. With expansionpack.
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
|
Part No: Brodit
848529
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 24.44 ($ 38.34)
Description:
For GPS-cable, sync-/data-/ charging-cable. For expan- sionpack with 2 PCMCIA slots. iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848550
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 19.99 ($ 31.36)
Description:
For GPS-cable, or sync-/ data-/charging-cable. For expansionpack 1 CF/ 1 PCMCIA slot. iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
968534
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
Plugs directly into your Cigarette lighter. Not expansionpack.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
968531
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 28 ($ 43.93)
Description:
For expansion pack with 1 Compact Flash slot or 1 PCMCIA slot.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848509
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 21.94 ($ 34.42)
Description:
For expansion pack w. 1 Compact Flash slot or 1 PCMCIA slot.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
848522
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 24.44 ($ 38.34)
Description:
For Compaq original data-cable. Not expansionpack. iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848549
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 24.44 ($ 38.34)
Description:
For GPS-cable, or sync-/data-/charging-cable. Not expansionpack.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|