Part No: Brodit
968531
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 28 ($ 43.00)
Description:
For expansion pack with 1 Compact Flash slot or 1 PCMCIA slot.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
992569
Product Type:
Brodit Car Cradle Holder With Speaker
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 67.8 ($ 104.12)
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt. Not expansionpack.
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
|
Part No: Brodit
945004
Product Type:
Brodit Charging/Data/Sync-Cable
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 14.99 ($ 23.02)
Description:
HotSync cable with RS232 with separate charging.
Technical Information:
For use between PDA and laptop, charges separately. Can also be used with charging-cable 942016 for simultaneous charging and data transfer.
|
Part No: Brodit
848570
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 21.94 ($ 33.69)
Description:
Built in original connector. Fits all cables. All expansionpack models, also Plus. iPAQ 38xx, 39xx, 54xx
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848544
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 19.99 ($ 30.70)
Description:
For GPS-cable, or sync-/ data-/charging-cable. For expansionpack (also Plus). iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
848569
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 21.94 ($ 33.69)
Description:
With built in original connector. Not expansionpack. Fits all cables.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
999570
Product Type:
Brodit Car Cradle Holder With Speaker
Product Fits:
Compaq iPAQ 54xx for all countries
Placement:
Price:
£ 64.99 ($ 99.81)
Description:
With built in connector. With tilt swivel. For expansionpack.
Technical Information:
Holder for cable attachment, with speaker. The choice for you who often connect e.g. a GPS- or charging/data-cable to your PDA. Fits all cables that fit with the device, both original and aftermarket cables (Leadtek, Royaltek, Holux, Haicom etc).
You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the device in the holder. (A charging cable must be connected in order for the amplifier to function.)
The holder is attached onto a tilt swivel so you can adjust the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
|
Part No: Brodit
848529
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Compaq iPAQ 39xx for all countries
Placement:
Price:
£ 24.44 ($ 37.53)
Description:
For GPS-cable, sync-/data-/ charging-cable. For expan- sionpack with 2 PCMCIA slots. iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
979570
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 38xx for all countries
Placement:
Price:
£ 51.99 ($ 79.84)
Description:
12-24 Volt. Straight cable for fixed installation and cable with TX, RX, Ground. For expansionpack.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.
With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
942016
Product Type:
Brodit Charging Cable
Product Fits:
Compaq iPAQ 36xx for all countries
Placement:
Price:
£ 17.95 ($ 27.57)
Technical Information:
A separate charging cord to your passive holder. We have now integrated the charging unit with the cigarette lighter plug.
|
Part No: Brodit
848509
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 36xx for all countries
Placement:
Price:
£ 21.94 ($ 33.69)
Description:
For expansion pack w. 1 Compact Flash slot or 1 PCMCIA slot.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
943016
Product Type:
Brodit Charging/Data/Sync-Cable
Product Fits:
Compaq iPAQ 36xx for all countries
Placement:
Price:
£ 20.9 ($ 32.10)
Description:
Charging- and Sync-cable with USB connector.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
|
Part No: Brodit
848509
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Compaq iPAQ 37xx for all countries
Placement:
Price:
£ 21.94 ($ 33.69)
Description:
For expansion pack w. 1 Compact Flash slot or 1 PCMCIA slot.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|