Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Huawei Brodit Car Holder Mount Catalog

Part No: Brodit 215781
Product Type: Brodit MultiStand
Product Fits: Huawei MediaPad M1 8.0 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for smaller surfpads. Length: 98 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 98 mm long and fits best with smaller surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 944775
Product Type: Brodit Charging Cable
Product Fits: Huawei Nexus 6P for all countries
Placement:
Price: £ 15.54
Description:
Charging cable Plugs directly into your Cigarette lighter. With USB Type-C connector, 2A charging. 12/24V. Angled connector.
Technical Information:
The USB Type-C connector house is angled. This means that the cable goes either on the back or on the front side, depending on which way you connect the cable to the device.
 
Cable length (+plug 9 cm): 46 cm, stretched:100 cm (or a bit more if needed).
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS
More Info Add to Shopping Cart
Part No: Brodit 513884
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Huawei Honor 8 for all countries
Placement:
Price: £ 72.13
Description:
With Molex adapter system. 2A charger. With tilt swivel.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform in your car.
 
With Molex adapter system. You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
The product is E-approved. 12/24 Volt. Connect the power cable with a 2A fuse. 2A charger. Professional installation recommended.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 512884
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Huawei Honor 8 for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your Huawei P9 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform in your car.
More Info Add to Shopping Cart
Part No: Brodit 521884
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Huawei Honor 8 for all countries
Placement:
Price: £ 70.07
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. With tilt swivel.
Technical Information:
The active holder charges your Huawei P9 when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 513990
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Huawei MediaPad T3 8.0 for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel, with Molex adapter system.
Technical Information:
Use an active holder for your MediaPad M3 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 521990
Product Type: Brodit Active Car Cradle Holder With USB-Cable And Cig-Plug Adapter
Product Fits: Huawei MediaPad T3 8.0 for all countries
Placement:
Price: £ 78.84
Description:
With tilt swivel. With USB cable.
Technical Information:
Use an active holder for your MediaPad M3 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder’s cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 941775
Product Type: Brodit Charging Cable
Product Fits: Huawei Nexus 6P for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With angled USB Type-C connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V. Angled connector.
Technical Information:
Charging cable with cig-plug. With USB Type-C connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The USB Type-C connector house is angled. This means that the cable goes either on the back or on the front side, depending on which way you connect the cable to the device.
More Info Add to Shopping Cart
Part No: Brodit 941775
Product Type: Brodit Charging Cable
Product Fits: Huawei Honor 8 for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With angled USB Type-C connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V. Angled connector.
Technical Information:
Charging cable with cig-plug. With USB Type-C connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The USB Type-C connector house is angled. This means that the cable goes either on the back or on the front side, depending on which way you connect the cable to the device.
More Info Add to Shopping Cart
Part No: Brodit 721032
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Huawei Mate 10 Pro for all countries
Placement:
Price: £ 72.99
Description:
Adjustable holder with USB-cable Plugs directly into your Cigarette lighter adapter. Fits for devices with and without original skin. With tilt swivel. 2,1A charging. 12/24V.
Technical Information:
Keep your phone in an active holder and you will always have it freshly charged. Neat, discreet and convenient. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket.
 
Adjustable holder for use with the bare device, or the device with original skin (which is included with the phone). Before using the holder you set the holder's width so it suits your device with or without skin. The holder has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto ProClip Mounting Platform.

Important info: In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
 
More Info Add to Shopping Cart
Part No: Brodit 713032
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Huawei Mate 10 Pro for all countries
Placement:
Price: £ 72.13
Description:
Adjustable holder. Fits for devices with and without original skin. With tilt swivel. 2A charging. 12/24V.
Technical Information:
Keep your phone in an active holder and you will always have it freshly charged. Neat, discreet and convenient. For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. Adjustable holder for use with the bare device, or the device with original skin (which is included with the phone). Before using the holder you set the holder's width so it suits your device with or without skin. The holder has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 721006
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Huawei Honor 9 for all countries
Placement:
Price: £ 70.07
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. With tilt swivel.
Technical Information:
The active holder charges your device when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 712006
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Huawei Honor 9 for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your Huawei P9 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt.
Attach onto a ProClip Mounting Platform in your car.
More Info Add to Shopping Cart
Part No: Brodit 521946
Product Type: Brodit Active Car Cradle Holder With USB-Cable And Cig-Plug Adapter
Product Fits: Huawei Mate 9 for all countries
Placement:
Price: £ 70.07
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. With tilt swivel.
Technical Information:
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car. Fits only devices without the included back cover on.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
Dimensions: 83 x 99 x 46 mm (W x H x D mm)
Weight: 124 g
Cable length (+connector with plug 85 mm): 145 cm

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 513956
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Huawei P10 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. 2A charging. 12/24V.
Technical Information:
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto ProClip Mounting Platform.
  
Dimensions: 81 x 98 x 48 mm (W x H x D mm)
Weight: 181 g
Cable length: Total length: 349 cm (Holder to box: 176 cm, Connectors+box 11 cm, Box to open end: 162 cm.)

 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
Approvals: E, CE, FCC, ROHS.
More Info Add to Shopping Cart
Catalog Pages:   1  2  3 [ 4 ] 5