Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Zebra Brodit Car Holder Mount Catalog

Part No: Brodit 550810
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 256.45
Description:
With lock, 2 keys. Fits devices with rugged frame, with and without expansion module/handstrap. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.      
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 531208
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Zebra ES400 for all countries
Placement:
Price: £ 97.72
Description:
With tilt swivel, with Molex adapter system. 2A charger. Fits devices with standard and extended battery.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 215970
Product Type: Brodit Table Stand
Product Fits: Zebra TC56 for all countries
Placement:
Price: £ 86.6
Description:
With power cable, worldwide adapters included. Fits devices with and without the original Boot/Skin.
Technical Information:
Start your workday with a freshly charged Zebra TC51/56 This is the solution for you who want to have charging to your TC51/56 in the office.The tablestand offers a convenient charging solution and does not take much space. The device is easy to place into the tablestad. The charging starts automatically when you put the device in the stand.
 
Fits devices with and without the Zebra Boot/Skin.
More Info Add to Shopping Cart
Part No: Brodit 711019
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Zebra TC20 for all countries
Placement:
Price: £ 30.76
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info Add to Shopping Cart
Part No: Brodit 511893
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Zebra ET50 8.3 for all countries
Placement:
Price: £ 139.25
Description:
Extra strength holder. Fits devices with rugged frame, with and without expansion module/handstrap.
Technical Information:
This holder is the perfect choice when you want to have your device firmly in place within easy reach. Custom fit for devices with rugged frame, with and without expansion module/handstrap. The holder is made of extra strong plastic. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
 
Dimensions: 275 x 190 x 90 mm (W x H x D mm)
Weight: 740 g
More Info Add to Shopping Cart
Part No: Brodit 941021
Product Type: Brodit Charging Cable
Product Fits: Zebra ET55 8.3 for all countries
Placement:
Price: £ 115.78
Description:
Hard wire for fixed installation, with DC power plug.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 74 cm from DC power connector to box, 10 cm box, 297 cm from box to open ends.
Weight: 147 g
 
Input voltage: 12 V, 2.7 A
Input Voltage: 24 V, 1.3 A
Output voltage: 12.6 V, 2,5 A
More Info Add to Shopping Cart
Part No: Brodit 522208
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Zebra ES400 for all countries
Placement:
Price: £ 86.82
Description:
With tilt swivel. For Mobilis Case item no 4104/SYM/ES400/CR.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 511208
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Zebra ES400 for all countries
Placement:
Price: £ 24.89
Description:
Fits devices with standard and extended battery.
Technical Information:
When keeping your device in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 526208
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Zebra ES400 for all countries
Placement:
Price: £ 97.72
Description:
With tilt swivel. Fits devices with standard and extended battery.
Technical Information:
Keep your device in an active holder while on the road, and you will always have a freshly charged battery! With cigarette lighter cable, 12/24 Volt.

The holder is equipped with a tilt swivel, this means that you can adjust the angle of your device for easier viewing and avoiding light reflection. Attach onto the ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 513707
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Zebra TC75 for all countries
Placement:
Price: £ 82.48
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Zebra ET55 10.1 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 539880
Product Type: Brodit Charging Cradle
Product Fits: Zebra ET50 8.3 for all countries
Placement:
Price: £ 155.04
Description:
With lock, 2 keys. With tilt swivel. With DC power connector (power supply NOT included).
Technical Information:
This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for bare devices (NOT for use with expansion module/handstrap/rugged frame). The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. You have full access to the camera and all buttons and outlets when the device is in the holder.
 
The holder has a DC connector to plug in a power supply, it charges via pogo pin connection. The power supply is NOT included in the holder, add one of these products in order to get charging to your device:
Item no. 944045    Cable with cigarette ligther plug, spiral cable, 5V out, 3A, 12/24V in.
Item no. 941017 Cable with cigarette ligther plug, straight cable, 12V out, 3A. 12V in. 
Item no. 941012    Hard wire cable for fixed installation, 12V out, 3A. 12V in.            
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 15° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes. Made in Sweden. Made of high grade ABS and Acetal plastic. Color: Black. Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.
More Info Add to Shopping Cart
Part No: Brodit 215780
Product Type: Brodit MultiStand
Product Fits: Zebra ET50 10.1 for all countries
Placement:
Price: £ 33.7
Description:
MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
Technical Information:
This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car’s dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 941021
Product Type: Brodit Charging Cable
Product Fits: Zebra ET50 8.3 for all countries
Placement:
Price: £ 115.78
Description:
Hard wire for fixed installation, with DC power plug.
Technical Information:
Cable with DC power plug. For use e.g. with Brodit Charging cradle.
 
Length: 74 cm from DC power connector to box, 10 cm box, 297 cm from box to open ends.
Weight: 147 g
 
Input voltage: 12 V, 2.7 A
Input Voltage: 24 V, 1.3 A
Output voltage: 12.6 V, 2,5 A
More Info Add to Shopping Cart
Part No: Brodit 711019
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Zebra TC25 for all countries
Placement:
Price: £ 30.76
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info Add to Shopping Cart
Catalog Pages:  [ 1 ] 2  3