Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

HP Brodit Car Holder Mount Catalog

Part No: Brodit 955648
Product Type: Brodit Handsfree Car Kit
Product Fits: HP iPAQ hw69xx for all countries
Placement:
Price: £ 169.39
Description:
For fixed installation, with Molex adapter system. With tilt swivel. 2 A charger.
Technical Information:
A neat and good solution for you who use your PDA as a telephone and a navigation device! The holder has a handsfree feature, a speaker and an amplifier. For fixed installation, with Molex adapter system so you can choose to use the holder as an active holder only for charging, or also for power supply of a GPS receiver, data transfer or other own solutions.

Connect the power cable with a 1,5 A fuse. (A charging cable must be connected in order for the amplifier to function.) 12 Volt. The product is E-approved. 2 A charger. 5 Volt out. Professional installation recommended.

It is easy to attach the microphone to the holder, and then to attach it in the desired position. For example you can attach it to the visor where it will be descreetly placed and in perfect position in order to give a good, clear sound. (3 m cable)

It is easy to put the device in the holder, and to take it out of the holder so you can easily take your PDA with you when leaving the vehicle. When you put the PDA in the holder, it is automatically connected to the handsfree and the charging device. The holder is attached onto a tilt swivel so it can be adjusted in order to avoid light reflection. The holder fits devices both with standard and extended battery. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 848798
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: HP iPAQ 100 Series for all countries
Placement:
Price: £ 24.89
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 971798
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: HP iPAQ 100 Series for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
With the Molex adapter system you can get power for a Bluetooth GPS receiver etc.  (The device does not support datatransfer.)
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info Add to Shopping Cart
Part No: Brodit 994696
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ rx5000 for all countries
Placement:
Price: £ 146.29
Description:
Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with Molex adater system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 1,5 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 979639
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ hw69xx for all countries
Placement:
Price: £ 51.99
Description:
With straight cable for fixed installation and cable with TX, RX, Ground. 12-24 Volt. Only for standard battery.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 971560
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: HP iPAQ h19xx for all countries
Placement:
Price: £ 92.38
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215088
Product Type: Brodit Mount With Tilt Swivel
Product Fits: HP iPAQ rz17xx for all countries
Placement:
Price: £ 22.66
Description:
Navigator
More Info Add to Shopping Cart
Part No: Brodit 848520
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: HP iPAQ h55xx for all countries
Placement:
Price: £ 34.99
Description:
For Compaq original data-cable. For Expansion pack (not Plus). iPAQ 55/54/39/38xx-ser.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
No Image
Part No: Brodit 979570
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ h55xx for all countries
Placement:
Price: £ 34.99
Description:
12-24 Volt. Straight cable for fixed installation and cable with TX, RX, Ground. For expansionpack.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 979610
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ h63xx for all countries
Placement:
Price: £ 34.99
Description:
With straight cable for fixed installation and cable with TX, RX, Ground. 12-24 Volt.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 968776
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ 610c Business Navigator for all countries
Placement:
Price: £ 46.92
Description:
With cig-plug.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle?s cigarette lighter socket, 12/24 Volt. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 968619
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: HP iPAQ rx37xx for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 979616
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ rz17xx for all countries
Placement:
Price: £ 34.99
Description:
With straight cable for fixed installation and cable with TX, RX, Ground. 12-24 Volt.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 992619
Product Type: Brodit Car Cradle Holder With Speaker
Product Fits: HP iPAQ rx37xx for all countries
Placement:
Price: £ 125.98
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 979569
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: HP iPAQ h55xx for all countries
Placement:
Price: £ 38.5
Description:
12-24 Volt. Straight cable for fixed installation and cable with TX, RX, Ground. Not expansionpack.
Technical Information:
An active holder with a straight cable with open end for fixed installation and a cable with RX, TX and Ground. The holder has two cables attached to the back side of the holder, this allows for a neat installation without cables hanging over the control panel or the dashboard. Can be used for tracking- and logistic systems etc. The charging device connects to the PDA automatically when you put the PDA in the holder. (GPS-cable can not be connected to the holder). 12/24 Volt. Connect the power cable with a 2 A fuse. 800 mA charger. Supplies the PDA with power, no external power supply of e.g. a GPS. Professional installation recommended.

With your PDA in an active holder, you will always have a fresh battery when leaving tghe vehicle. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Catalog Pages: < Prev 1... 2  3  4  5  6 [ 7 ] 8  9  10  11  12 ...19 Next >