Part No: Brodit
849612
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 25.08 ($ 39.35)
Description:
With built in connector. Fits cable 942040 (not original charging cable). O2 XDA IIs/Qtek 9090 etc.
Technical Information:
Holder with cable plug attachment, with an iPAQ original connector built in with the holder. Is to be used with charging-, data-, sync- or GPS-cable. Fits all cables that fit with the PDA, both original and aftermarket cables. You attach the cable to the bottom of the holder the same way as you do to the PDA, but you don't have to attach it manually every time you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Quick and easy installation onto a ProClip Mounting Platform.
|
Part No: Brodit
992612
Product Type:
Brodit Car Cradle Holder With Speaker
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 67.8 ($ 106.36)
Description:
Active holder Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt. Qtek 9090/XDA III/MDA III
Technical Information:
Active holder with speaker and cigarette lighter cable. The choice for you who frequently use your PDA. Charges your PDA's battery while it is in the holder. The PDA automatically connects to the charging device every time you put the device in the holder. 12/24 Volt. (The charging cable must be connected in order for the amplifier to function)
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
|
Part No: Brodit
845612
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 14.66 ($ 23.00)
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
843749
Product Type:
Brodit Car Cradle Holder With 3-In-1 Adapter
Product Fits:
Audiovox PPC-6800 for USA
Placement:
Price:
£ 39.99 ($ 62.74)
Description:
40 cm adapter cable. For an upright, closed position.
Technical Information:
The holder with 3-in-1 adapter is the choice for you who want to connect a headset to your device while charging it. You can also connect the device to your stereo AUX input in order to play MP3-files. 40 cm adapter cable. When you put the device in the holder, it is automatically connected to:
- Mini USB for charging
- 3,5 mm audion for sound out
- HTC Ext USB for original headset
The holder is designed with a tilt swivel, this means that you can adjust your device in order to avoid reflections in the display. The PDA holders have a perfect fit and holds the PDA firmly in place. When you put the device in the holder the device internal speaker will be shut down (otherwise the headset and 3,5 mm plug will not work).
Attach the holder onto a ProClip Mounting Platform in your vehicle and you will have your PDA in easy reach -safe and convenient.
|
Part No: Brodit
968612
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
Plugs directly into your Cigarette lighter.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
994612
Product Type:
Brodit Car Cradle Holder With Speaker
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 79.8 ($ 125.19)
Description:
Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Technical Information:
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.
12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
847612
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 24.99 ($ 39.20)
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
971612
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 53.5 ($ 83.93)
Description:
For fixed installation, with Molex adapter system for GPS and data transfer. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
968749
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox XV-6800 for USA
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
Plugs directly into your Cigarette lighter. For an upright, closed position.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
846612
Product Type:
Brodit Car Cradle Holder For Cable Attachment
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 14.66 ($ 23.00)
Description:
For GPS-cable, or sync-/data-/charging-cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
Part No: Brodit
968749
Product Type:
Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC-6800 for USA
Placement:
Price:
£ 35.01 ($ 54.92)
Description:
Plugs directly into your Cigarette lighter. For an upright, closed position.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. The device can be placed in the holder in a vertical, closed position or a horizontal, open position -choose which way you want to use your device and then simply turn the holder into desired position! Attach onto ProClip Mounting Platform.
|
Part No: Brodit
848623
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC4100 for USA
Placement:
Price:
£ 21.89 ($ 34.34)
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
848661
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC-6700 SP for all countries
Placement:
Price:
£ 21.89 ($ 34.34)
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
848612
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 21.94 ($ 34.42)
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
|
Part No: Brodit
942040
Product Type:
Brodit Charging Cable
Product Fits:
Audiovox PPC-66xx for USA
Placement:
Price:
£ 22.12 ($ 34.70)
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
|