Part No: Brodit
215058
Product Type:
Brodit Device Mounting Adapter
Product Fits:
Placement:
Price:
£ 15.14
Description:
Mounting plate with Richter adapter, with tilt swivel.
Technical Information:
Base plate: 42x50 mm.
|
Part No: Brodit
213005
Product Type:
Brodit MoveClip
Product Fits:
Placement:
Price:
£ 10.38
Description:
MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Technical Information:
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.
|
Part No: Brodit
215367
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Parrot CK3100 for all countries
Placement:
Price:
£ 23.08
Technical Information:
Used for installation of a display for Parrot CK3100 onto a ProClip Mounting Platform instead of onto a vertical surface. You can adjust the display in order to avoid light reflecion. The cable can point downward or backward in desired angle.
|
Part No: Brodit
202001
Product Type:
Brodit Device Mounting Adapter
Product Fits:
Placement:
Price:
£ 5.94
Description:
Mounting plate Richter, female with adhesive tape.
|
Part No: Brodit
215503
Product Type:
Brodit MoveClip
Product Fits:
Placement:
Price:
£ 10.38
Description:
MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws. With release button.
Technical Information:
MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip. MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.
|
Part No: Brodit
215130
Product Type:
Brodit Mount With Tilt Swivel
Product Fits:
Parrot 3200 LS-COLOR for all countries
Placement:
Price:
£ 22.66
Technical Information:
A small, oval face plate with predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.
|
Part No: Brodit
215437
Product Type:
Brodit Mounting Plate
Product Fits:
Placement:
Price:
£ 7.2
Description:
Extension plate, 155x50x5mm. With predrilled holes.
Technical Information:
The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. With predrilled holes. Made of black ABS plastic. Size: 155x50x5mm.
|
Part No: Brodit
215053
Product Type:
Brodit Device Mounting Adapter
Product Fits:
Placement:
Price:
£ 13.56
Description:
Device mounting adapter, AMPS-standard holes.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device. The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface. Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius ratellite receiver and a ProClip Mounting Platform.
|
Part No: Brodit
213006
Product Type:
Brodit MoveClip
Product Fits:
Placement:
Price:
£ 10.38
Description:
MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.
Technical Information:
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.
|
Part No: Brodit
213093
Product Type:
Brodit MoveClip
Product Fits:
Placement:
Price:
£ 10.38
Description:
MoveClip for Tilt swivel, with predrilled holes. 1 female + 1 male + 2 screws. 50 x 42 x 5 mm.
Technical Information:
The Move Clip system is basically a female plate with a wide V-slot and a male plate that is shaped to fit into the V-slot in the female plate. The male plate slides into the female plate. The female plate attaches to a mounting bracket or any kind of flat surface. The male plate attaches on the back of your device or on your device holder/cradle. The Move Clip System can be used in vehicles, boats, RV's, walls, computer monitors etc. You can have as many of each part as you want to. This Move Clip Kit is for moving one device in and out of one vehicle.
|
Part No: Brodit
215130
Product Type:
Brodit Mount With Tilt Swivel
Product Fits:
Parrot CK3200 LS-COLOR for all countries
Placement:
Price:
£ 22.66
|
Part No: Brodit
511308
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price:
£ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder. The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
|
Part No: Brodit
215183
Product Type:
Brodit Mounting Plate
Product Fits:
Placement:
Price:
£ 7.2
Description:
Extension plate,100x50x5mm. With predrilled AMPS holes.
Technical Information:
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws, Size: 100x50x5mm.
|
Part No: Brodit
213008
Product Type:
Brodit Mounting Plate
Product Fits:
Placement:
Price:
£ 10.7
Description:
Extension plate, 149x69x5 mm. (3 pieces/pack)
Technical Information:
The extension plate makes it possible two attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws and adhesive tape on the back. Two predrilled holes. Dimensions: 149x69x5 mm
|
Part No: Brodit
511307
Product Type:
Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price:
£ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder. The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
|