Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Other Device Holder Mount Catalog

Part No: Brodit 862024
Product Type: Brodit ProAntenna
Product Fits:
Placement:
Price: £ 29.99
Description:
FME male to SME female (straight).
More Info Add to Shopping Cart
No Image
Part No: Brodit PV24S
Product Type: Brodit Voltage Converter
Product Fits:
Placement:
Price: £ 29.99
Description:
AlfaTronix Not isolated 24-12V switched - (24 - 30 amp)
More Info Add to Shopping Cart
No Image
Part No: Brodit PV6S
Product Type: Brodit Voltage Converter
Product Fits:
Placement:
Price: £ 29.99
Description:
AlfaTronix Not isolated 24-12V switchad - (6-10 amp)
More Info Add to Shopping Cart
Part No: Brodit 511319
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Ingenico iWL250 for all countries
Placement:
Price: £ 36.64
Technical Information:
With your unit in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the unit in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the unit when it is in the holder. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 811070
Product Type: Brodit Headrest Mount
Product Fits:
Placement:
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 211 mm.
Technical Information:
Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 211 mm.
More Info Add to Shopping Cart
Part No: Brodit 215461
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 7.54
Description:
Mounting adapter for MultiStand. Screws included. 50x60x8 mm.
Technical Information:
Mounting adapter for MultiStand. Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of Black ABS plastic. Dimensions: 50x60x8 mm.

Complete list of MultiStand
More Info Add to Shopping Cart
Part No: Brodit 527630
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits:
Placement:
Price: £ 72.13
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 527629
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits:
Placement:
Price: £ 72.13
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 511625
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price: £ 82.35
Description:
Adjustable holder. Fits devices with skin. Width: 185-245 mm. Height: 108-173 mm.
Technical Information:
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
  
Features
The adjustable holder fits for devices with the following dimensions: Width: 185-245 mm, Height: 108-173 mm. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. Before using the holder you set the size to fit with your device. The holder is designed with the intention to leave as much space open as possible for connection of charging cables and/or headphones.
 
Important 
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 215665
Product Type: Brodit Pipe Mount With Mounting Plate
Product Fits:
Placement:
Price: £ 45.04
Description:
Fits diameter 19-30 mm. Mounting plate 160x50 mm. 6 pre-drilled holes.
Technical Information:
For installation of devices on pipes and rods/bars, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mount has a mounting plate sized 160x50 mm with 6 pre-drilled holes. The mount fits pipes with diameter 19-30 mm. Made in black plastic.
More Info Add to Shopping Cart
Part No: Brodit 527620
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits:
Placement:
Price: £ 72.13
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 521628
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 712020
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Isucard 10 for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. With cig-plug, 12/24 Volt. Attach onto a ProClip Mounting Platform or pedestal.
 
Dimensions: 78 x 128 x 50 mm (W x H x D mm).
Weightt: 156 g.
Cable length (+plug 8 cm): 44cm, stretched 60 (or a bit more if needed).
More Info Add to Shopping Cart
Part No: Brodit 521841
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. With Micro USB Type C charging cable.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 215718
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 19.9
Description:
MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws. With long release lever.
Technical Information:
MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip.
 
MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.
 
More Info Add to Shopping Cart
Catalog Pages: < Prev 1... 8  9  10  11  12 [ 13 ] 14  15  16  17  18 ...25 Next >