Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Other Device Holder Mount Catalog

Part No: Brodit 215578
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 9.12
Description:
Shifted to the right.
Technical Information:
To be used when you need to mount a holder slightly pushed aside from the ProCLip's reglar point of attachment. Comes with 4 screws. Four predrilled holes.
More Info Add to Shopping Cart
Part No: Brodit 213079
Product Type: Brodit Mount
Product Fits:
Placement:
Price: £ 15.44
Description:
Angled mounting platform, 60°. Attach with adhesive tape to flat, horizontal surface.
Technical Information:
Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
More Info Add to Shopping Cart
Part No: Brodit 215421
Product Type: Brodit Mount With Tilt Swivel
Product Fits:
Placement:
Price: £ 40.68
Description:
For a horizontal surface, adjustable 360 degrees.
Technical Information:
A turnable mount for a stable and flexible installation onto a horizontal surface. Perfect for installation of any device/equipment that you want to be able to turn easily, e.g. a payment terminal in a shop or a touch-screen which several people use. You can turn the mount 360° sideways and the face plate, which is attached onto a tilt swivel, can be adjusted in height as well as turned 360° into desired angle. The mount can also be attached e.g. onto a ProClip Mounting Platform.

The face plate of the mount has predrilled holes (AMPS-standard) and the dimension of the face plate is 42x50 mm. The base plate of the mount has four predrilled holes and the dimension of the base plate is 42x50 mm. The mount is 62 mm high.
More Info Add to Shopping Cart
Part No: Brodit 215484
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 7.2
Description:
Extension plate, 149x69x5 mm.
Technical Information:
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a PDA holder as well as a mobile phone holder. Comes with screws and adhesive tape on the back.

Dimensions: 149x69x5 mm.
More Info Add to Shopping Cart
Part No: Brodit 945078
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 9.2
Description:
Molex Pin 4 adaptor to RX/TX/Ground, with open ends.
Technical Information:
Length of cable: 100cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 215205
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 13.56
Description:
Vertical adapter plate for Arkon.
Technical Information:
A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Base plate: 42x50 mm.
More Info Add to Shopping Cart
Part No: Brodit 215118
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 10.38
Description:
Extension plate, 143x50x5mm. With predrilled AMPS holes.
Technical Information:
The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a mobile phone holder. Predrilled holes, AMPS standard. Made of black ABS plastic. Size: 143x50x5mm.
More Info Add to Shopping Cart
Part No: Brodit 215181
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 34.3
Description:
Flexible arm, 15 cm. With predrilled AMPS-standard holes.
Technical Information:
A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position.
More Info Add to Shopping Cart
Part No: Brodit 215055
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
MoveClip "Right" with 4 holes in both male & female.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215052
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 7.3
Description:
V-slot button and clip holder. With predrilled holes.
Technical Information:
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip. 50x50x9 mm.
More Info Add to Shopping Cart
Part No: Brodit 215284
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 4.02
Description:
Headset Hook. For PDA handheld holders.
Technical Information:
A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.

For use with PDA handheld holders. Fits holders both with and without tilt swivel. 2 screws included in the package.
More Info Add to Shopping Cart
Part No: Brodit 215341
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 13.56
Description:
Self tapping screws. 50 pcs.
Technical Information:
Self tapping screws for ABS plastic, used when making own special mounting solutions.
More Info Add to Shopping Cart
Part No: Brodit 215481
Product Type: Brodit Device Mounting Adapter
Product Fits: Parrot Minikit Smart for all countries
Placement:
Price: £ 24.69
Technical Information:
The choice for you who want to have your Parrot Minikit Smart device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215497
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 10.38
Description:
Universal mount for slot button and clip holder. With predrilled holes.
Technical Information:
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.
More Info Add to Shopping Cart
Part No: Brodit 215054
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
MoveClip "Left" with 4 holes in both male & female.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Catalog Pages: < Prev   1  2  3 [ 4 ] 5  6  7  8  9  10 ...25 Next >