Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Other Device Holder Mount Catalog

Part No: Brodit 213077
Product Type: Brodit Mount
Product Fits:
Placement:
Price: £ 15.44
Description:
Angled mounting platform, 30°. Attach with adhesive tape to flat, horizontal surface.
Technical Information:
Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
More Info Add to Shopping Cart
Part No: Brodit 215054
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
MoveClip "Left" with 4 holes in both male & female.
Technical Information:
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 945008
Product Type: Brodit Mounting Accessories
Product Fits:
Placement:
Price: £ 10.38
Description:
Female cigg-plug with open ends for fixed installation.
Technical Information:
Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter plug for a fixed installation. Is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

Connect the power cable with a 1,5 A fuse. Professional installation recommended. Can also be used as an additional socket.
More Info Add to Shopping Cart
Part No: Brodit 945074
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 10.38
Description:
Molex Pin 4 adaptor to Mini USB.
Technical Information:
Length of cable: 176,5cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 945012
Product Type: Brodit Adapter Cable
Product Fits:
Placement:
Price: £ 9.2
Description:
Molex Pin 2 adaptor to cig-plug.
Technical Information:
Is to be attached to the Molex adapter system in order to replace the cable for fixed installation with a cigarette lighter cable.

Length of cable: 42,5cm (connector heads not included).
More Info Add to Shopping Cart
Part No: Brodit 510203
Product Type: Brodit Passive Car Cradle Holder
Product Fits: Ingenico ICT 220 for all countries
Placement:
Price: £ 30.76
Technical Information:
When keeping your unit in a passive holder, it is always within easy reach. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215450
Product Type: Brodit Mounting Plate
Product Fits:
Placement:
Price: £ 10.38
Description:
Distance plate, 42x50x14 mm. With predrilled AMPS holes.
Technical Information:
Used for positioning the installed equipment further away from the dashboard. Dimensions: 42x50x14 mm.
More Info Add to Shopping Cart
Part No: Brodit 511230
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price: £ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 6-10 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 521630
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits:
Placement:
Price: £ 72.99
Description:
Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.
Technical Information:
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
More Info Add to Shopping Cart
Part No: Brodit 215159
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 13.56
Description:
Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.
Technical Information:
Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.
More Info Add to Shopping Cart
Part No: Brodit 213078
Product Type: Brodit Mount
Product Fits:
Placement:
Price: £ 15.44
Description:
Angled mounting platform, 45°. Attach with adhesive tape to flat, horizontal surface.
Technical Information:
Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.
More Info Add to Shopping Cart
Part No: Brodit 215061
Product Type: Brodit Device Mounting Adapter
Product Fits:
Placement:
Price: £ 7.54
Description:
Device mounting Female adapter, AMPS-standard holes. To 215053.
Technical Information:
The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the Device or Cradle.

The Device Mounting Adapter consists of two parts - one Male Plate and One Female Plate that slides into each other and locks into place. The Male Plate attaches to the back of the Device/Device Cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The Female Plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the Device or Device Cradle can easily be removed from the mount. Your Device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the Male Plate. The pictures show the Device Mounting Adapter in use with a Sirius Satellite Receiver and a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215452
Product Type: Brodit Tilt Swivel
Product Fits:
Placement:
Price: £ 13.56
Description:
Oval centered face plate with predrilled AMPS holes. Adjustable 20°.
Technical Information:
A small, oval face plate with predrilled holes for Brodit holders and THB HF-kits. Can be angled 20° in every direction.
More Info Add to Shopping Cart
Part No: Brodit 511231
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits:
Placement:
Price: £ 27.82
Description:
Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 9-13 mm.
Technical Information:
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 49-63 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 215527
Product Type: Brodit MoveClip
Product Fits:
Placement:
Price: £ 10.38
Description:
MultiMoveClip: adapter plate for holder without tilt swivel. With AMPS holes.
Technical Information:
A mounting adapter for you who has a holder without tilt swivel that you wish to use with your MultiMoveClip (item number 215503). Fits holders with AMPS holes.
More Info Add to Shopping Cart
Catalog Pages: < Prev   1  2  3  4 [ 5 ] 6  7  8  9  10 ...25 Next >