Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Brodit Multimedia, MP3, DVD Holder Mount Catalog

Part No: Brodit 511365
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Dell Latitude for all countries
Placement:
Price: £ 33.7
Technical Information:
With your device in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 521577
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad Air for all countries
Placement:
Price: £ 84.72
Description:
With USB-cable Plugs directly into your Cigarette lighter adapter. Apple approved charging cable. With tilt swivel.
Technical Information:
The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Length of charging cable: 123 cm.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 511538
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Sony Xperia Tablet Z for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Tablet Z in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Tablet Z when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Surface into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 521139
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Apple iPad for all countries
Placement:
Price: £ 84.72
Description:
With tilt swivel. With USB cable. Apple approved charging cable.
Technical Information:
Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder?s cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car?s dashboard if they block the view or block key controls. ProClip (Brodit?s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car?s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle?s dashboard is always done on the customer?s own responsibility. Brodit recommends to use tablets on the car?s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 533091
Product Type: Brodit Mounting Accessories
Product Fits: Apple iPod Touch 2nd Generation for all countries
Placement:
Price: £ 16.72
Description:
Tilt swivel mount. For TomTom Car Kit.
Technical Information:
The choice for you who want to have your TomTom Car Kit device installed in a neat and safe way! within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sight.

You can easily take the device with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 849846
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPod 5th Generation Video 60 GB for all countries
Placement:
Price: £ 74.74
Description:
Padded.
Technical Information:
All cables that can be used with the iPod can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPod in the holder. (Cable not included)
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 511252
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: ViewSonic ViewPad 7 for all countries
Placement:
Price: £ 33.7
Technical Information:
With your ViewPad 7 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the ViewPad 7 when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the ViewPad 7 into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 849846
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: Apple iPod Classic 2nd Generation 160 GB for all countries
Placement:
Price: £ 74.74
Description:
Padded.
Technical Information:
All cables that can be used with the iPod can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPod in the holder. (Cable not included)
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 511652
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Samsung Galaxy Tab S 8.4 SM-T700 for all countries
Placement:
Price: £ 33.7
Technical Information:
With your Samsung in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the Samsung when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Samsung into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 840756
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPod Classic 160 GB for all countries
Placement:
Price: £ 39.58
Description:
For after-market cable. With tilt swivel. With plush coating.
Technical Information:
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 840718
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits: Apple iPod Nano 2:nd Generation for all countries
Placement:
Price: £ 24.89
Description:
Padded.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adhustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info Add to Shopping Cart
Part No: Brodit 215394
Product Type: Brodit Device Mounting Adapter
Product Fits: Apple iPod Nano 4th Generation for all countries
Placement:
Price: £ 16.72
Description:
Fits with holders 840640, 840651, 840653, 840677, 840687, 840688 and 840689.
Technical Information:
With the Nano adapter you can use the same holder for your Nano as well as for your full-size iPod! You simply put the adapter in the holder when you want to use it for a Nano, and take it out when you want to use it for a full-size iPod.
More Info Add to Shopping Cart
Part No: Brodit 848693
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPod 3rd Generation 30 GB for all countries
Placement:
Price: £ 39.58
Description:
Adjustable in width and depth. Fits devices with and without skins. For original cable and Neo ProLink v2 Dock Cable.
Technical Information:
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info Add to Shopping Cart
Part No: Brodit 515244
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Apple iPad 2 for all countries
Placement:
Price: £ 45.41
Description:
For Apple Composite AV Cable. With tilt swivel.
Technical Information:
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Part No: Brodit 541265
Product Type: Brodit Car Cradle Holder For Locking
Product Fits: HTC Flyer for all countries
Placement:
Price: £ 54.21
Description:
Passive holder with tilt swivel. With spring stud locking.
Technical Information:
This holder is to be used when you want to have your HTC Flyer extra securely in place and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
More Info Add to Shopping Cart
Catalog Pages: < Prev   1  2  3  4  5 [ 6 ] 7  8  9  10  11 ...116 Next >