Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Handspring Treo 650
 Brodit Active Car Cradle Holder With Tilt Swivel Function (Brodit 971635)

Brodit Active Car Kit Holder Mount With Tilt Swivel Function for Handspring Treo 650
Reference ID: 12860.
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function.
Part Number: Brodit 971635.
Fitment: Handspring Treo 650 For All Countries.

Price:
£ 49.99
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Active Car Cradle Holder With Tilt Swivel Function also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Active Car Cradle Holder With Tilt Swivel Function for Handspring Treo 650:

Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the holder please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters.

Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.

Installation of the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. 4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Handspring Treo 650:

Part No: Brodit 968635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 25
Description:
Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt, 2 A.

The holder only fits devices with standard battery. Adapter for sound can be connected to the PDA when it is in the holder (not included). Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 848590
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 21.94
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 845635
Product Type: Brodit Car Cradle Holder For Cable Attachment
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 24.99
Description:
For charging cable.
Technical Information:
Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 220012
Product Type: Brodit Belt Clip Holster
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For horizontal attachment.
More Info
Part No: Brodit 942635
Product Type: Brodit Charging Cable
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 17.95
Description:
12-24 Volt.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 220012
Product Type: Brodit Belt Clip Holster
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For horizontal attachment.
More Info
Part No: Brodit 220011
Product Type: Brodit Belt Clip Holster
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For vertical attachment.
More Info
Part No: Brodit 968635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 25
Description:
Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848590
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 21.94
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 971635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 49.99
Description:
For fixed installation, with Molex adapter system. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Active Holder with Cigarette Lighter Plug.

The choice for you who frequently use your PDA. Charges your PDA battery while it's in the holder. The PDA connects to the charging device every time you put the PDA in the holder. 12/24 Volt.

The holder is designed with a tilt swivel, this means that you can adjust the PDA in order to avoid reflections in the display.

The PDA holders have a perfect fit and holds the PDA firmly in place. Attach the holder onto a ProClip Mounting Platform in your vehicle and you'll have your PDA in easy reach - safe and convenient.