Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Handspring Treo 650
 Brodit Car Cradle Holder For Cable Attachment (Brodit 845635)

Holder F. Cable Attachment for Handspring Treo 650
Reference ID: 7962.
Product Type: Brodit Car Cradle Holder For Cable Attachment.
Part Number: Brodit 845635.
Fitment: Handspring Treo 650 For All Countries.

Price:
£ 24.99
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Holder with cable plug attachment. The choice for you who often connect a data-cable to your PDA. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Car Cradle Holder For Cable Attachment also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder For Cable Attachment for Handspring Treo 650:

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the holder with the backside downwards. Press on both sides of the connector, so the notches go into the connector. Place the connector into the lower part of the holder. The mark pointing downwards, so you can not see it when placing the connector into the holder.

2. Place the back piece over the connector and screw it onto place with the enclosed screws.

3. The cable is in place.

4. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Handspring Treo 650:

Part No: Brodit 968635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 25
Description:
Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt, 2 A.

The holder only fits devices with standard battery. Adapter for sound can be connected to the PDA when it is in the holder (not included). Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 848590
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 21.94
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 220012
Product Type: Brodit Belt Clip Holster
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For horizontal attachment.
More Info
Part No: Brodit 942635
Product Type: Brodit Charging Cable
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 17.95
Description:
12-24 Volt.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Part No: Brodit 220012
Product Type: Brodit Belt Clip Holster
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For horizontal attachment.
More Info
Part No: Brodit 220011
Product Type: Brodit Belt Clip Holster
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 9.99
Description:
Padded holster. For vertical attachment.
More Info
Part No: Brodit 968635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 25
Description:
Plugs directly into your Cigarette lighter. With tilt swivel. 12/24 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 971635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Handspring Treo 650 for all countries
Placement:
Price: £ 49.99
Description:
For fixed installation, with Molex adapter system. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 848590
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 21.94
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 971635
Product Type: Brodit Active Car Cradle Holder With Tilt Swivel Function
Product Fits: Palm Treo 650 for all countries
Placement:
Price: £ 49.99
Description:
For fixed installation, with Molex adapter system. 2A charger.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Tablet PC Holder.

Use a Tablet PC holder for your own convenience and safety!

You can attach a charging cable when the device is in the holder.

You can easily take the monitor with you when leaving the vehicle.

The holder comes with a tilt swivel, so it is adjustable for avoiding light reflection in the screen.