Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Honda Odyssey 2002-2004 LHD
Brodit ProClip Mount (Brodit 853166)

ProClip for Honda Odyssey 2002-2004 LHD
Reference ID: 10466.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 853166.
Fitment: Honda Odyssey 2002-2004 LHD For Europa.
Placement: Center mount.

Price:

£ 15.97
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following Vehicle :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Honda Odyssey:

Attention! Read all instructions and look at the pcitures before attaching the ProClip.

This ProClip consists of two parts.
Part 1: Attaching part (the smallest part)
Part 2: ProClip face plate.

1. Press the thin ends of the enclosed gap openers into the gap between the control panel and the dashboard to widen the gap. Place the gap openers approx. 10 cm apart.

2. Peel off the cover of the adhesive tape on Part 1. Press part 1 into the gap between the gap openers. Press rightwards on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive attaches on the dashboard. Pull out the gap openers.

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the left. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1, in the same angle as Part 1.

4. The ProClip is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Honda Odyssey 2002-2004 LHD:

Part No: Brodit 603514
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2005-2007 RHD for Australien
Placement: Right mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854551
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2011-2017 LHD for USA
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 653167
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2002-2004 RHD for Australien
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 610820
Product Type: Brodit Headrest Mount
Product Fits: Honda Odyssey 2002-2010 RHD for Australien
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 811020
Product Type: Brodit Headrest Mount
Product Fits: Honda Odyssey 2005-2013 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 854551
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2011-2012 LHD for USA
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Honda Odyssey 2011-2012 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 803168
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2002-2004 LHD for Europa
Placement: Left mount
Price: £ 15.97
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 803550
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2005-2007 LHD for USA
Placement: Left mount
Price: £ 15.97
Description:
ONLY for models with button panel below air vent.
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 653244
Product Type: Brodit ProClip Mount
Product Fits: Honda Odyssey 2000-2004 RHD for England
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Catalog Pages:  [ 1 ] 2  3  4  5  6  7  8  9 
Additional Information

Additional Information:
What is Brodit ProClip?

Here are the primary descriptions of what the Brodit ProClip is:

1) Brodit ProClips provide a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

2) Brodit ProClips provide a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

3) The ProClip is a mounting bracket for the vehicle´s dashboard. Onto the Proclip you can install for example a holder for your mobile phone or PDA or a handsfree set. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

4) The ProClip brackets give you a safe and easy way to mount your holders and cradles without damaging your cars interior. Installation is very simple and only takes a few seconds without the need for any screws or other fixings, you just simply clip the ProClip Bracket on to your car's dashboard, and removal is just as easy and leaves no marks whatsoever on your dashboard.

The main benefits of the ProClip Platform are:

1) No drilling and no dashboard modification required at all. You insert the ProClip into existing car dashboard's holes.

2) The installation is easy and safe. Insert or remove the ProClip quick and easy.

3) Removal does not leave any marks.

Read more about Brodit ProClip Platform.