Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Motorola Defy
Brodit Passive Car Cradle Holder With Tilt Swivel (Brodit 511229)

Passive Holder With Tilt Swivel for Motorola Defy
Reference ID: 33224.
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel.
Part Number: Brodit 511229.
Fitment: Motorola Defy For All Countries.

Price:

£ 24.89
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

When keeping your device in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

This Product is also Compatible with the Following Device :

The drop-down list below provides a list of other devices which this Passive Car Cradle Holder With Tilt Swivel also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Passive Car Cradle Holder With Tilt Swivel for Motorola Defy:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

3. Slide the device sideways into the holder.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Motorola Defy:

Part No: Brodit 512229
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Motorola Defy for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 513229
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Motorola Defy for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).  
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 944011
Product Type: Brodit Charging Cable
Product Fits: Motorola Defy for all countries
Placement:
Price: £ 15.54
Description:
Micro USB. 12/24V. Angled.
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.
More Info
Part No: Brodit 941011
Product Type: Brodit Charging Cable
Product Fits: Motorola Defy for all countries
Placement:
Price: £ 18.72
Description:
Charging cable Plugs directly into your Cigarette lighter. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
Technical Information:
Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941010.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS

More Info
Additional Information

Additional Information:
Keep Your PDA in a Customized Holder!

A PDA holder makes it easier and more fun to use your PDA in your vehicle.
Keep your PDA in a holder and you will always have it in easy reach - safe and convenient!

With Tilt Swivel.
All PDA holders are designed with a tilt swivel. The tilt swivel provides easy adjustment of your PDAs' position for better viewing.

High Quality.
The holders have a perfect fit and provides a firm installation. It is easy to place the PDA in the holder, and to take it out of the holder.

A Wide Range of Products.
The holders are customized for every different PDA model, and are available for most models on the market. A customized holder is usually ready when a new model appears on the market.

Many Alternatives.
PDA holders are available with various features, from passive holders to more advanced solutions for fixed installation.

Attach onto ProClip.
Attach the holder onto the ProClip Mounting Platform in your vehicle. The installation is quick and easy, and does not damage the interior.

Safer Driving.
With your PDA in a holder, it is always within easy reach. Our goal is to provide you with convenient products and solutions, to give you a safer driving environment while driving and operating your equipment.