Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Motorola MC65
Brodit Active Car Cradle Holder For Fixed Installation (Brodit 532013)

Active Holder For Fixed Installation for Motorola MC65
Reference ID: 26207.
Product Type: Brodit Active Car Cradle Holder For Fixed Installation.
Part Number: Brodit 532013.
Fitment: Motorola MC65 For All Countries.

Price:

£ 84.11
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior. The charging device is integrated in the holder itself, so there is no large charging box on the cable.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. The holder fits devices both with standard and extended battery. Attach onto ProClip Mounting Platform.

This Product is also Compatible with the Following 5 Devices :

The drop-down list below provides a list of other devices which this Active Car Cradle Holder For Fixed Installation also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Active Car Cradle Holder For Fixed Installation for Motorola MC65:

Please read all of the instructions and look at the pictures before attaching the holder. Important Note: Route the cable from the holder into the vehicle dashboard and route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Motorola MC65:

Part No: Brodit 512013
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Motorola MC65 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. Fits devices with standard and extended battery.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 511013
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Symbol MC65 for all countries
Placement:
Price: £ 24.89
Description:
Fits devices with standard and extended battery.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 513013
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Symbol MC65 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger. Fits devices with standard and extended battery.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 512013
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Symbol MC65 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. Fits devices with standard and extended battery.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 511013
Product Type: Brodit Passive Car Cradle Holder With Tilt Swivel
Product Fits: Motorola MC65 for all countries
Placement:
Price: £ 24.89
Description:
Fits devices with standard and extended battery.
Technical Information:
With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.
More Info
Part No: Brodit 513013
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Motorola MC65 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel, with Molex adapter system. 2A charger. Fits devices with standard and extended battery.
Technical Information:
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 530013
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Motorola MC65 for all countries
Placement:
Price: £ 86.82
Description:
With tilt swivel. Slim design with charger integrated in the holder.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. The holder fits devices both with standard and extended battery. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 532180
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Motorola MC65 for all countries
Placement:
Price: £ 84.11
Description:
With tilt swivel. Slim design with charger integrated in the holder and with USB on-the-go connectivity.
Technical Information:
Are you using your Symbol every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; this active holder supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Symbol can be run as both host and client (depending on the equipment connected to the holder).

The active holder has a unique slim design with the charging box integrated in the holder, so the cigarette lighter cable has no hefty charging box on the cable. The holder is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the holder to a ProClip Mounting Platform in order to get a firm installation in any car or truck. The holder can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required)
Item no 945020 Micro USB - USB-A female
More Info
Part No: Brodit 530180
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Symbol MC65 for all countries
Placement:
Price: £ 86.82
Description:
With tilt swivel. Slim design with charger integrated in the holder and with USB on-the-go connectivity.
Technical Information:
Are you using your Symbol every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; this active holder supplies a fully charged
battery at all times, as well as USB on-the-go! This means that the Symbol can be run as both host and client (depending on the equipment connected to the holder).

The active holder has a unique slim design with the charging box integrated in the holder, so the cigarette lighter cable has no hefty charging box on the cable. The holder is made of black ABS plastic which is cold and heat resistant so you can use it in any environment. It is safe to use because of the short circuit protection and its high efficiency which reduces the heat produced in the unit.

Attach the holder to a ProClip Mounting Platform in order to get a firm installation in any car or truck. The holder can be used with the following cables:
Item no 945021 Micro USB - RS-232 (driver required)
Item no 945020 Micro USB - USB-A female
More Info
Part No: Brodit 532013
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Symbol MC65 for all countries
Placement:
Price: £ 84.11
Description:
With tilt swivel. Slim design with charger integrated in the holder.
Technical Information:
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior. The charging device is integrated in the holder itself, so there is no large charging box on the cable.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. The holder fits devices both with standard and extended battery. Attach onto ProClip Mounting Platform.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Why Buying «Active Holder For Fixed Installation for Motorola MC65» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...