Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Navman F20
Brodit Active Car Cradle Holder With Cig-Plug (Brodit 215270)

Active Holder With Cig-Plug for Navman F20
Reference ID: 443.
Product Type: Brodit Active Car Cradle Holder With Cig-Plug.
Part Number: Brodit 215270.
Fitment: Navman F20 For All Countries.

Price:

£ 51.29
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module. (TMC module not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

This Product is also Compatible with the Following 5 Devices :

The drop-down list below provides a list of other devices which this Active Car Cradle Holder With Cig-Plug also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Active Car Cradle Holder With Cig-Plug for Navman F20:

Please read all of the instructions and look at the pictures before attaching the mount. The mount can be used with devices both with and without a TMC device.

1. For devices without TMC: Loosen the screw in the original mount and pull the mount apart so you get three parts. Place the 215270- mount in the desired position and attach it with the enclosed screws. Place the locking ring onto the 215270-mount. NOTE: It is important to put the ring the right way onto the mount (as shown in picture).

2. Press the original mount onto the 215270-mount. Lock the original mount onto the 215270-mount by tightening the locking ring. Attach the charging cable.

3. For devices with TMC: The same installation procedure applies as for devices without TMC.

4. The mount is in place, with device in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Navman F20:

Part No: Brodit 215258
Product Type: Brodit Mount
Product Fits: Navman F20 for all countries
Placement:
Price: £ 16.72
Description:
For devices with a TMC module.
Technical Information:
Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your device in order to avoid light reflection in the screen. (TMC module not included).
More Info
Part No: Brodit 215237
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: Navman F20 for all countries
Placement:
Price: £ 51.29
Description:
With tilt swivel. 12 Volt.
Technical Information:
The active holder charges your battery when it is in the holder. The charging device connects to the device automatically when you put the PNA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
More Info
Part No: Brodit 215242
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Navman F20 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. 12/24 Volt, 2 A charger.
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 215271
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: Navman F20 for all countries
Placement:
Price: £ 57.17
Description:
With tilt swivel. 12/24 Volt, 2 A charger. For devices with a TMC module.
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Fits devices with a TMC module. (TMC module not included).
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 215090
Product Type: Brodit Mount With Tilt Swivel
Product Fits: Navman F20 for all countries
Placement:
Price: £ 21.97
Technical Information:
Use this descreet adapter with parts of the original holder for the Navman iCN 320, attach onto a ProClip in your vehicle and you will get a perfect installation! Your device is firmly in place within easy reach. The adapter is attached onto a tilt swivel, this means that you can adjust your device in order to avoid light reflection in the screen.
More Info
Part No: Brodit 215191
Product Type: Brodit Mount With Tilt Swivel
Product Fits: Navman F20 for all countries
Placement:
Price: £ 16.72
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The device can be adjusted in order to avoid light reflection. You can easily take the unit with you when leaving the vehicle. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 942625
Product Type: Brodit Charging Cable
Product Fits: Navman F20 for all countries
Placement:
Price: £ 15.54
Technical Information:
For use in the vehicle’s cigarette lighter socket, charges your PDA. Can be connected to the PDA when it is in a passive holder.
More Info
Additional Information

Additional Information:
Holders For GPS.

Passive Holders For GPS.
More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle.

The holders can be adjusted in order to avoid light reflection on the screen.

Active Holder for GPS.
Keep your unit in a holder from Brodit. There are active holders for various demands, from standard active holders with charging cable to more advanced solutions for fixed installation.

When you put the unit in the holder, it is automatically connected to the charging device. 12/24 Volt.
The holders with charging cable connect to the vehicle's cigarette lighter socket.

The holders for fixed installation are connected behind the dashboard, this gives a neat installation without cables hanging over the interior.

The holders come with a tilt swivel and can be adjusted in order to avoid light reflection.

Attach onto ProClip Mounting Platform.