Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Peugeot 306 1993-2002 RHD
Brodit ProClip Mount (Brodit 652467)

ProClip for Peugeot 306 1993-2002 RHD
Reference ID: 2507.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 652467.
Fitment: Peugeot 306 1993-2002 RHD For England.
Placement: Center mount.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

How to Install ProClip Mount in Peugeot 306:

Attention! Read all instructions before attaching the ProClip
1. Press the lower part of the ProClip, with angle, into the gap between the airvent and the panel frame at pos. 1.
2. Press the upper part of the ProClip, with groove, into the gap between the air vent and the padded dashboard at pos. 2.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Peugeot 306 1993-2002 RHD:

Part No: Brodit 652648
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 852648
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 852467
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 LHD for Europa
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 830525
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 LHD for Europa
Placement: Console mount
Price: £ 25.08
Description:
Adjustable console mount with tilt swivel.
Technical Information:
A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
More Info
Part No: Brodit 810510
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Headrest mount
Price: £ 77.01
Description:
For Apple iPad.
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 155 mm
More Info
Part No: Brodit 810810
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia monitors in vehicles. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat’s headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It’s easy to take the monitor with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The headrest monitor mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the headrest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 632468
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Console mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 832468
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 LHD for Europa
Placement: Console mount
Price: £ 15.97
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 630520
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Console mount
Price: £ 17.76
Description:
Adjustable console mount.
Technical Information:
A ProClip that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
More Info
Part No: Brodit 630525
Product Type: Brodit ProClip Mount
Product Fits: Peugeot 306 1993-2002 RHD for England
Placement: Console mount
Price: £ 25.08
Description:
Adjustable console mount with tilt swivel.
Technical Information:
A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
What is Brodit ProClip?

Here are the primary descriptions of what the Brodit ProClip is:

1) Brodit ProClips provide a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

2) Brodit ProClips provide a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

3) The ProClip is a mounting bracket for the vehicle´s dashboard. Onto the Proclip you can install for example a holder for your mobile phone or PDA or a handsfree set. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

4) The ProClip brackets give you a safe and easy way to mount your holders and cradles without damaging your cars interior. Installation is very simple and only takes a few seconds without the need for any screws or other fixings, you just simply clip the ProClip Bracket on to your car's dashboard, and removal is just as easy and leaves no marks whatsoever on your dashboard.

The main benefits of the ProClip Platform are:

1) No drilling and no dashboard modification required at all. You insert the ProClip into existing car dashboard's holes.

2) The installation is easy and safe. Insert or remove the ProClip quick and easy.

3) Removal does not leave any marks.

Read more about Brodit ProClip Platform.