Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Rover 75 1999-2005 LHD
Brodit Headrest Mount With Monitor Mount (Brodit 810510)

Headrest Mount With Monitor Mount for Rover 75 1999-2005 LHD
Reference ID: 26859.
Product Type: Brodit Headrest Mount With Monitor Mount.
Part Number: Brodit 810510.
Fitment: Rover 75 1999-2005 LHD For Europa.
Placement: Headrest mount.

Price:

£ 77.01
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 155 mm

This Product is also Compatible with the Following 363 Vehicles :

The drop-down list below provides a list of other vehicles which this Headrest Mount With Monitor Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Headrest Mount With Monitor Mount in Rover 75:

Please read all of the instructions and look at the pictures before attaching the headrest mount.

1. Remove the two screws in the front side of the headrest mount using the enclosed tool, so you get two parts. Loosen the screw underneath the headrest mount so the face plate can be slided back and forth. Adjust the face plate position and tigten the screw. Place one part of the headrest mount on each side of the headrest. Put back the screws and tighten them until the headrest mount is properly in place. Place the monitor holder onto the face plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

3. Switch between portrait and landscape mode by turning the holder.

4. The headrest mount is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Rover 75 1999-2005 LHD:

Part No: Brodit 653424
Product Type: Brodit ProClip Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 652725
Product Type: Brodit ProClip Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 852725
Product Type: Brodit ProClip Mount
Product Fits: Rover 75 1999-2005 LHD for Europa
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 811010
Product Type: Brodit Headrest Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
Technical Information:
Note: Two-part solution!
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 810916
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 104.98
Description:
With flexible arm. For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810711
Product Type: Brodit Headrest Mount VESA
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 47.69
Description:
Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
Technical Information:
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 810711
Product Type: Brodit Headrest Mount VESA
Product Fits: Rover 75 1999-2005 LHD for Europa
Placement: Headrest mount
Price: £ 47.69
Description:
Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
Technical Information:
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 810910
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810810
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia monitors in vehicles. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat’s headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It’s easy to take the monitor with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The headrest monitor mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the headrest in you vehicle, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810510
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Rover 75 1999-2005 RHD for all countries
Placement: Headrest mount
Price: £ 77.01
Description:
For Apple iPad.
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 155 mm
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Headrest Monitor Mount with Flexile Arm.

Are you planning to install Tablet DVD or perhaps a video, DVD-unit or Playstation 2 in your car?
With Brodit monitor mount, you can position your screen for easier viewing and to avoid light reflection.

The headrest monitor mount with flexible arm for monitors gives optimum viewing and easy screen adjustment. With the extended flexible arm you can adjust the screen just the way you want.

Installation is simple and will not damage your vehicle's interior. You can easily take the monitor with you when leaving the vehicle.

It is easy to install a mutlimedia monitor in the vehicle. First you attach a monitor mount onto the headrest of a front seat. The mount is available for various monitor models. Then you attach the monitor to the mount. The monitor is firmly in place, and can easily be removed when leaving the vehicle.