Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Scion XB 2004-2011 LHD
Brodit Headrest Mount With Monitor Mount (Brodit 810826)

Headrest Mount With Monitor Mount for Scion XB 2004-2011 LHD
Reference ID: 31427.
Product Type: Brodit Headrest Mount With Monitor Mount.
Part Number: Brodit 810826.
Fitment: Scion XB 2004-2011 LHD For USA.
Placement: Headrest mount.

Price:

£ 78.6
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.

This Product is also Compatible with the Following 1923 Vehicles :

The drop-down list below provides a list of other vehicles which this Headrest Mount With Monitor Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Headrest Mount With Monitor Mount in Scion XB:

Attention! Please read all of the instructions and look at the before attaching the headrest mount.

1.Remove the two screws in the frontside of the head rest mount with the enclosed tool. Place one part of the head rest mount on each side of the headrest. Put back the screws. Tighten the screws.

2. Screw until the headrest mount is properly in place.

3 and 4. The headrest mount is in place, with monitor.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Scion XB 2004-2011 LHD:

Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2010 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2014 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2009 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853777
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2007 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2008 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810820
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 811020
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2012 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 123 mm.
Maximum outer size between headrest bars: 183 mm.
More Info
Part No: Brodit 811020
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2014 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Catalog Pages:  [ 1 ] 2  3  4 
Additional Information

Additional Information:
Headrest Monitor Mount with Flexile Arm.

Are you planning to install Tablet DVD or perhaps a video, DVD-unit or Playstation 2 in your car?
With Brodit monitor mount, you can position your screen for easier viewing and to avoid light reflection.

The headrest monitor mount with flexible arm for monitors gives optimum viewing and easy screen adjustment. With the extended flexible arm you can adjust the screen just the way you want.

Installation is simple and will not damage your vehicle's interior. You can easily take the monitor with you when leaving the vehicle.

It is easy to install a mutlimedia monitor in the vehicle. First you attach a monitor mount onto the headrest of a front seat. The mount is available for various monitor models. Then you attach the monitor to the mount. The monitor is firmly in place, and can easily be removed when leaving the vehicle.