Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Scion XB 2008-2010 LHD
Brodit ProClip Mount (Brodit 854110)

ProClip for Scion XB 2008-2010 LHD
Reference ID: 24922.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 854110.
Fitment: Scion XB 2008-2010 LHD For USA.
Placement: Center mount, Low.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following 8 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Scion XB:

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Press the thin end of the enclosed gap opener into the gap between the air vent panel frame and the center console panel frame, to widen it. Peel off the cover of adhesive tape on the ProClip.

2. Hold the ProClip in an almost 45 degree angle towards the dashboard and press/hook the curved edge on the left side of the ProClip into the gap below the gap opener. Flip the ProClip to the right, towards the air vent, so the curved edge hooks behind the center console panel frame. Pull out the gap opener.

3. Press the gap opener into the gap between the air vent panel frame and the padded part of the dashboard. Push firmly forward on the right side of the ProClip so the grooved edge goes into the gap below the gap opener. Press until you see or hear/feel it snaps into place. Pull out the gap opener.

4. The ProClip is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Scion XB 2008-2010 LHD:

Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2014 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853777
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2007 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2009 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xB 2004-2011 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2008 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810520
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 77.01
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2016 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xB 2004-2012 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xB 2004-2012 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Catalog Pages:  [ 1 ] 2  3  4 
Additional Information

Additional Information:
Brodit - with More Than 20 Years in the Business!

Brodit was conceived back in June 1983 as its founder Ebbe Johansson was sitting in his Taxi and had the vision of talking on the phone while driving without having to pull over. Some of you still remember the mobile phones from back then. They were not as neat and handy as they are today. They were more like suitcases weighing about 40 pounds with receivers as big as a brick! Ebbe saw the need for an easy way to have the receiver installed close to the driver's seat in order to use it comfortably. As a result, the ProClip was born, which is still the market leader for mounting platforms for communication equipment in vehicles today.

Since then, many thousand different models and solutions have been developed for just about every vehicle in the world. Easy installation is one of the objectives, and another is not having to drill holes or in any other way damage the interior of the car! Brodit also produces holders for PDAs, mobile phones, GPS devices and multimedia monitors, but the ProClip is still Brodit´s main product.

Read more information about Brodit.
Visit Brodit web-site.