Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Scion XB 2008-2014 LHD
Brodit ProClip Mount (Brodit 854110)

ProClip for Scion XB 2008-2014 LHD
Reference ID: 52274.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 854110.
Fitment: Scion XB 2008-2014 LHD For USA.
Placement: Center mount, Low.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following 8 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Scion XB:

Please read all of the instructions and look at the pictures before attaching the ProClip.

Installation for models with Automatic gear shift: 1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the panel frame surrounding the gear shift, to widen the gap. Press the upper right corner of the ProClip into the gap next to the gap opener. Keep the ProClip in an angled position so the adhesive tape does not attach. Pull out the gap opener. Slide the ProClip 17 mm (¾ inch) forward. Press down on the right side of the ProClip so the rest of the angled edge goes into the gap. 2. Press the gap opener into the gap between the center console panel frame and the console sidewall. Slide the gap opener towards the ProClip. Press down on the top left side of the ProClip so the angled left edge goes into the gap next to the gap opener. Press until you see/hear/feel it click into place. Pull out the gap opener.
Installation for models with Manual gear shift 3. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the console trim, to widen the gap. Push down on the gap opener to widen the gap even more. Press the angled edge on the left side of the ProClip into the gap next to the gap opener. Press the ProClip rightward so the angled right edge hooks over the console edge by the rubber boot. Press until you see/hear/feel it click into place. Press down on the right side of the ProClip to make sure the angled edge is properly hooked over the edge.
4. The ProClip is in place, fits models with manual and automatic gear shift.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Scion XB 2008-2014 LHD:

Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2010 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion xB 2008-2009 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 853777
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2007 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 854110
Product Type: Brodit ProClip Mount
Product Fits: Scion XB 2008 LHD for USA
Placement: Center mount, Low
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810820
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2010 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xB 2004-2011 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 811020
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2012 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 123 mm.
Maximum outer size between headrest bars: 183 mm.
More Info
Part No: Brodit 811020
Product Type: Brodit Headrest Mount
Product Fits: Scion xB 2004-2014 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.
More Info
Catalog Pages:  [ 1 ] 2  3  4 
Additional Information

Additional Information:
Why Buying «ProClip for Scion XB 2008-2014 LHD» at Mountonus.com?

Mountonus.com is your Single-Stop Shop for all your vehicle mounting needs!

Mountonus are the largest suppliers of Brodit Mounting systems. Brodit develops and manufactures products for installation of communication devices in vehicles. Brodit was founded in 1983 and is located in Karlsborg, Sweden. The company has about 50 employees, is market leading in Scandinavia and exports to 30 countries. All Brodit mounting systems are made in Sweden to the highest quality.

User-friendly solutions and high quality are the two major priorities, a business concept that has kept Brodit strong in more than 20 years in a tough market. "Things are looking good" says Ebbe Johansson, Brodit founder and CEO, about the future. "We are far ahead in a number of new areas, and the past years' investments in multimedia and PDAs are showing good results. Right now there is a frantic activity in the Brodit building."

The Brodit ProClip is a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

The Brodit ProClip is a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

Read More About Our Brodit Store...