Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Scion XD 2008 LHD
Brodit ProClip Mount (Brodit 854111)

ProClip for Scion XD 2008 LHD
Reference ID: 11489.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 854111.
Fitment: Scion XD 2008 LHD For USA.
Placement: Center mount.

Price:

£ 17.76
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

This Product is also Compatible with the Following 16 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Scion XD:

Please read all of the instructions and look at the pictures before attaching the ProClip.

1. Press the thin end of the enclosed gap opener into the gap between the console sidewall and the console trim, to widen it. Push slightly down on the gap opener to widen the gap even more and press the angled edge on the left side of the ProClip into the gap.

2. Press firmly rightward on the left side of the ProClip so the angled edge on the right side of the ProClip hooks over the console trim edge. Press until you see or hear/feel it snaps into place. Pull out the gap opener.

3. Press down on the right side of the ProClip to make sure the angled edge is properly hooked over the console trim edge and for best possible attachment of the adhesive tape.

4. The ProClip is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Scion XD 2008 LHD:

Part No: Brodit 810820
Product Type: Brodit Headrest Mount
Product Fits: Scion xD 2008-2010 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount
Product Fits: Scion xD 2008-2010 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount
Product Fits: Scion xD 2008-2010 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xD 2008-2011 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810826
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xD 2008-2012 LHD for USA
Placement: Headrest mount
Price: £ 78.6
Description:
With flexible arm. For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 854111
Product Type: Brodit ProClip Mount
Product Fits: Scion xD 2008-2009 LHD for USA
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 810721
Product Type: Brodit Headrest Mount
Product Fits: Scion xD 2008-2013 LHD for USA
Placement: Headrest mount
Price: £ 47.69
Description:
Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Technical Information:
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of vehicles, some of them are listed below. Are you missing a model? Measure the headrest in your vehicle, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
More Info
Part No: Brodit 810820
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xD 2008-2013 LHD for USA
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810520
Product Type: Brodit Headrest Mount
Product Fits: Scion xD 2008-2010 LHD for USA
Placement: Headrest mount
Price: £ 77.01
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Scion xD 2008-2012 LHD for USA
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Catalog Pages:  [ 1 ] 2  3  4 
Additional Information

Additional Information:
What is Brodit ProClip?

Here are the primary descriptions of what the Brodit ProClip is:

1) Brodit ProClips provide a mounting platform for installation of communication accessories in vehicles. Giving you a safer and more convenient driving environment when operating your mobile phone, PDA handheld, navigation unit or other communications equipment while driving.

2) Brodit ProClips provide a dashboard mounting bracket for installation of holders, mounting adapters and other accessories. Keep your communication devices attached to the dashboard in a secure and convenient way - always within easy reach!

3) The ProClip is a mounting bracket for the vehicle´s dashboard. Onto the Proclip you can install for example a holder for your mobile phone or PDA or a handsfree set. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

4) The ProClip brackets give you a safe and easy way to mount your holders and cradles without damaging your cars interior. Installation is very simple and only takes a few seconds without the need for any screws or other fixings, you just simply clip the ProClip Bracket on to your car's dashboard, and removal is just as easy and leaves no marks whatsoever on your dashboard.

The main benefits of the ProClip Platform are:

1) No drilling and no dashboard modification required at all. You insert the ProClip into existing car dashboard's holes.

2) The installation is easy and safe. Insert or remove the ProClip quick and easy.

3) Removal does not leave any marks.

Read more about Brodit ProClip Platform.