Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

TomTom GO 5000
Brodit Mounting Accessories (Brodit 215567)

Mounting Accessories for TomTom GO 5000
Reference ID: 49190.
Product Type: Brodit Mounting Accessories.
Part Number: Brodit 215567.
Fitment: TomTom GO 5000 For All Countries.

Price:

£ 24.89
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

The choice for you who prefer to have your GPS device within easy sight and reach attached onto the dashboard instead of in the windshield. The product consists of a tilt swivel mount and a MultiMoveClip that replaces the original mount.

You can easily take you device with you when leaving the car. A charging cable can be connected to the device when it is in place in the mount. You can adjust the angle of the device in order to avoid light reflection. Attach the mount onto a ProClip Mounting Platform.

This Product is also Compatible with the Following 28 Devices :

The drop-down list below provides a list of other devices which this Mounting Accessories also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Mounting Accessories for TomTom GO 5000:

Please read all of the instructions and look at the pictures before attaching the mount.

1. Remove the original assembly/arm that includes the suction cup: Push the suction cup assembly/arm rightwards into a horizontal position. Lift/bend the suction cup assembly/arm so the ball joint eases out of the cup in which it sits.

2. Attach the mount onto your device: Hold the mount horizontally and hook the ball into the hole on the back of your device. Turn the mount into vertical position so it locks/hooks into place in the device. Place the MultiMoveClip onto the desired position and screw into place with the enclosed screws.

3. Put the device in place: Slide the device straight downward into the MultiMoveClip so you hear/feel it snaps into place. Remove the mount: Press the latch on the MultiMoveClip (accessed through the hole of the mount) and press/lift the mount straight upward and out of the MultiMoveClip.

4. The mount is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for TomTom GO 5000:

Part No: Brodit 215588
Product Type: Brodit Mounting Accessories
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 16.72
Description:
Tilt swivel mount.
Technical Information:
Keep your GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.
 
With this tilt swivel mount you can have your GPS installed on the dashboard. You use the original mount that comes with the GPS and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.
 
Please Note that the original TomTom Dock is not included.
More Info
Part No: Brodit 215683
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 56.98
Description:
With Cigarette Lighter Cable.
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach for example a charging cable or a TMC cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. The enclosed cable can not be used for TMC.
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 215682
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 45.04
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!
 
If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 944010. (944010 can not be used for TMC).
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)
More Info
Part No: Brodit 215684
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 86.46
Description:
With straight cable for fixed installation.
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Additional Information

Additional Information:
Installation of Monitors for Navigation Systems.

ProAdapt is an adapter-system for firm, reflection-free installation of monitors in vehicles. ProAdapt consists of different mounting details and is designed to be mounted onto a ProClip Mounting Platform. The installation is quick and easy, and will
not damage the interior. You can easily take the monitor with you when leaving the vehicle.

ProClip is a car specific dashboard mounting bracket which allows you to make several installations in vehicles.

There are ProClips for many different placements in the vehicle and there is a ProClip available for most car models on the market.