Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

TomTom GO 5000
Brodit Mounting Accessories (Brodit 215588)

Mounting Accessories for TomTom GO 5000
Reference ID: 51176.
Product Type: Brodit Mounting Accessories.
Part Number: Brodit 215588.
Fitment: TomTom GO 5000 For All Countries.

Price:

£ 16.72
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Keep your GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.
 
With this tilt swivel mount you can have your GPS installed on the dashboard. You use the original mount that comes with the GPS and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.
 
Please Note that the original TomTom Dock is not included.

This Product is also Compatible with the Following 11 Devices :

The drop-down list below provides a list of other devices which this Mounting Accessories also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Mounting Accessories for TomTom GO 5000:

Please read all of the instructions and look at the pictures before attaching the mount. Please Note that the original TomTom Dock is not included.
 
1. Place the tilt swivel mount in the desired position. Screw the mount into place with the enclosed screws.
 
2. The tilt swivel mount is in place. This mount fits a number a devices, the installation procedure may vary but the principal is similar for all devices.
 
3. For the installation, you will use the original mount that comes with the GPS and press it onto the tilt swivel mount. Place the original mount by the tilt swivel mount so the tilt swivel fits. Press the original mount onto the tilt swivel mount, press until you feel it is properly in place.
 
4. The mount is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for TomTom GO 5000:

Part No: Brodit 215683
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 56.98
Description:
With Cigarette Lighter Cable.
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach for example a charging cable or a TMC cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. The enclosed cable can not be used for TMC.
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 215682
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 45.04
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!
 
If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 944010. (944010 can not be used for TMC).
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)
More Info
Part No: Brodit 215684
Product Type: Brodit Active Dock Car Cradle Holder With Tilt Swivel
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 86.46
Description:
With straight cable for fixed installation.
Technical Information:
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 215567
Product Type: Brodit Mounting Accessories
Product Fits: TomTom GO 5000 for all countries
Placement:
Price: £ 24.89
Description:
Tilt swivel mount.
Technical Information:
The choice for you who prefer to have your GPS device within easy sight and reach attached onto the dashboard instead of in the windshield. The product consists of a tilt swivel mount and a MultiMoveClip that replaces the original mount.

You can easily take you device with you when leaving the car. A charging cable can be connected to the device when it is in place in the mount. You can adjust the angle of the device in order to avoid light reflection. Attach the mount onto a ProClip Mounting Platform.
More Info
Additional Information

Additional Information:
Keep Your PNA in a Holder!

Passive Holders.
A passive holder keeps your PNA within close reach.
You can use a charging cable when the device is in the holder. You can adjust your PNA in order to avoid light reflection in the screen. You can easily take the device with you when leaving the vehicle. Attach onto ProClip Mounting Platform.

Active Holders.
There are active holders with cigarette lighter plug or for fixed installation.
The PNA is automatically connected to the charging device when you put it in the holder. You can adjust your PNA in order to avoid light reflection. Attach onto ProClip Mounting Platform.

Monitor Mounts.
Monitor mounts for a firm, reflection-free installation of monitors in vehicles.
The installation is quick and easy, and does not damage the interior. You can easily take the monitor with you when leaving the vehicle.

A holder makes it much easier to use your device in your vehicle.
Keep your PNA in a holder and you will always have it in easy reach - safe and convenient!

A Wide Range of Products.
The holders are customized for every different PNA model, and are available for most models on the market. A customized holder is usually ready when a new model appears on the market.

High Quality.
The holders have a perfect fit and provides a firm installation. It is easy to place the device in the holder, and to take it out of the holder, so you can easily take your PNA with you when leaving the vehicle.

Many Alternatives.
PNA holders are available with various features. All mounts and holders are adjustable in order to avoid light reflection in the screen.

Attach onto ProClip.
Attach the holder onto the ProClip Mounting Platform in your vehicle. The installation is quick and easy, and does not damage the interior.

Safer Driving.
With your device in a holder, it is always within easy reach. Our goal is to provide you with convenient products and solutions, to give you a safer driving environment while driving and operating your equipment.