Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

TomTom GO 730
Brodit Car Cradle Holder With Pass-Through Connector (Brodit 278024)

Holder With Pass-Through Connector for TomTom GO 730
Reference ID: 18902.
Product Type: Brodit Car Cradle Holder With Pass-Through Connector.
Part Number: Brodit 278024.
Fitment: TomTom GO 730 For All Countries.

Price:

£ 52.28
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

Active holder with pass-through connector and cigarette lighter plug. All cables that can be used with the GPS device can also be used with the holder, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! Fits TMC with miniUSB connector (TMC not included).

When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. The holder has a cigarette lighter plug for connection to the vehicle's 12 Volt socket. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

This Product is also Compatible with the Following 14 Devices :

The drop-down list below provides a list of other devices which this Car Cradle Holder With Pass-Through Connector also compatible with. That means you can mount the listed devices using this product "as is" without any modifications or additional preparation.

Select a device from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install Car Cradle Holder With Pass-Through Connector for TomTom GO 730:

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. All cables that fit the device, can also be attached to the holder.

4. The holder is in place.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for TomTom GO 730:

Part No: Brodit 215267
Product Type: Brodit Mount With Tilt Swivel
Product Fits: TomTom GO 730 for all countries
Placement:
Price: £ 22.66
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 279024
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: TomTom GO 730 for all countries
Placement:
Price: £ 72.13
Description:
Active holder for fixed installation. With tilt swivel. 12/24 Volt. With TMC connectivity (MiniUSB plug).
Technical Information:
Active holder with pass-through connector and for fixed installation. All cables that can be used with the GPS device can also be used with the holder, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. Fits TMC with miniUSB connector (TMC not included).
 
The holder has a straight cable with open end for fixed installation. The cable is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can easily take the device with you when leaving the vehicle. 12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
More Info
Part No: Brodit 215268
Product Type: Brodit Active Car Cradle Holder With Cig-Plug
Product Fits: TomTom GO 730 for all countries
Placement:
Price: £ 46.92
Description:
With tilt swivel.
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 277024
Product Type: Brodit Car Cradle Holder With Pass-Through Connector
Product Fits: TomTom GO 730 for all countries
Placement:
Price: £ 53.02
Description:
Passive holder with tilt swivel. With TMC connectivity (MiniUSB plug).
Technical Information:
Passive holder with pass-through connector. All cables that can be used with the GPS device can also be used with the holder, for example a charging cable or a TMC cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. Fits TMC with miniUSB connector (TMC not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Part No: Brodit 215269
Product Type: Brodit Active Car Cradle Holder For Fixed Installation
Product Fits: TomTom GO 730 for all countries
Placement:
Price: £ 72.13
Description:
With tilt swivel. 12/24 Volt, 2 A charger.
Technical Information:
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
More Info
Additional Information

Additional Information:
Holders For GPS.

Passive Holders For GPS.
More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle.

The holders can be adjusted in order to avoid light reflection on the screen.

Active Holder for GPS.
Keep your unit in a holder from Brodit. There are active holders for various demands, from standard active holders with charging cable to more advanced solutions for fixed installation.

When you put the unit in the holder, it is automatically connected to the charging device. 12/24 Volt.
The holders with charging cable connect to the vehicle's cigarette lighter socket.

The holders for fixed installation are connected behind the dashboard, this gives a neat installation without cables hanging over the interior.

The holders come with a tilt swivel and can be adjusted in order to avoid light reflection.

Attach onto ProClip Mounting Platform.