Mountonus Brodit ProClip Mount Shop Logo
UK Trusted Supplier of Brodit ProClip Mount and Car Cradle Holder Solutions.

Volkswagen Golf IV 1998-2003 LHD
Brodit ProClip Mount (Brodit 830535)

ProClip for Volkswagen Golf IV 1998-2003 LHD
Reference ID: 6860.
Product Type: Brodit ProClip Mount.
Part Number: Brodit 830535.
Fitment: Volkswagen Golf IV 1998-2003 LHD For Europa.
Placement: Console mount.

Price:

£ 25.08
Click the button below to add this product to your Shopping Cart.
You will be automatically redirected to your Shopping Cart page after that.
Add to Shopping Cart

Product Description:

A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.

This Product is also Compatible with the Following 115 Vehicles :

The drop-down list below provides a list of other vehicles which this ProClip Mount also compatible with. That means you can install this product into the listed vehicles "as is" without any modifications or additional preparation.

Select a vehicle from the drop-down list below and click the button to the right to see the detail page for that particular application.

How to Install ProClip Mount in Volkswagen Golf IV:

Attention! Read all instructions before attaching the ProClip.

1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ProClip.

2. Hook the upper part of the ProClip, with adhesive tape, over the edge of the console into the gap at pos. 1. Hook the long lower part of the ProClip, with angle, under the edge of the console at position 2.
3. Press the upper and the lower part of the ProClip towards each other until the face of the ProClip has a flat/horizontal position. Tighten the nut with the enclosed tool. Place the enclosed cap over the nut.

4. The ProClip is in place.

In most vehicles the adjustable ProClip is placed on the right side of the
console. Howerever, in some vehicles it is placed on the left side of the console and in a few cases there are different solutions e.i. mounting in the cup holder. When you choose the location for the ProClip it is important to make sure that the location spot will give the ProClip the necessary hold/grip onto the console and that it will not block the airbag.

Installation Photos:

Installation Photo Installation Photo
Installation Photo Installation Photo

Other Products for Volkswagen Golf IV 1998-2003 LHD:

Part No: Brodit 652526
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 652808
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 852526
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 LHD for Europa
Placement: Center mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 630530
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Console mount
Price: £ 17.76
Description:
Adjustable console mount.
Technical Information:
A ProClip that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
More Info
Part No: Brodit 852808
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 LHD for Europa
Placement: Angled mount
Price: £ 17.76
Technical Information:
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
More Info
Part No: Brodit 630535
Product Type: Brodit ProClip Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Console mount
Price: £ 25.08
Description:
Adjustable console mount with tilt swivel.
Technical Information:
A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of vehicles. In most vehicles it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
More Info
Part No: Brodit 810520
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Volkswagen Golf IV 1998-2003 LHD for Europa
Placement: Headrest mount
Price: £ 77.01
Description:
For Apple iPad.
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm
More Info
Part No: Brodit 810920
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Headrest mount
Price: £ 69.98
Description:
For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
Technical Information:
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Part No: Brodit 810520
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Headrest mount
Price: £ 77.01
Description:
For Apple iPad.
Technical Information:
The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 123 mm
Maximum outer distance between the headrest bars: 183 mm
More Info
Part No: Brodit 810820
Product Type: Brodit Headrest Mount With Monitor Mount
Product Fits: Volkswagen Golf IV 1998-2003 RHD for all countries
Placement: Headrest mount
Price: £ 42.36
Description:
For multimedia-monitors with a vertical slot in back.
Technical Information:
For installation of multimedia screens in vehicles. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat’s head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It’s easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.
More Info
Catalog Pages:  [ 1 ] 2 
Additional Information

Additional Information:
Brodit - with More Than 20 Years in the Business!

Brodit was conceived back in June 1983 as its founder Ebbe Johansson was sitting in his Taxi and had the vision of talking on the phone while driving without having to pull over. Some of you still remember the mobile phones from back then. They were not as neat and handy as they are today. They were more like suitcases weighing about 40 pounds with receivers as big as a brick! Ebbe saw the need for an easy way to have the receiver installed close to the driver's seat in order to use it comfortably. As a result, the ProClip was born, which is still the market leader for mounting platforms for communication equipment in vehicles today.

Since then, many thousand different models and solutions have been developed for just about every vehicle in the world. Easy installation is one of the objectives, and another is not having to drill holes or in any other way damage the interior of the car! Brodit also produces holders for PDAs, mobile phones, GPS devices and multimedia monitors, but the ProClip is still Brodit´s main product.

Read more information about Brodit.
Visit Brodit web-site.